User Guide

5
5.3 Specifying a Zoom Setting
5-8 Konica 8020/8031
Specifying Copy Settings Chapter 5
5.3 Specifying a Zoom Setting
Copies of documents can be enlarged or reduced.
There are eight ways to change the zoom ratio.
G Automatic scaling (“Auto Size” setting)
G Full size (“×1.000” setting)
G Enlarging (“Enlarge” settings)
G Reducing (“Reduce” settings)
G Minimizing (“Minimal” setting)
G Zooming
G Custom sizing (“CustomZoom” setting)
G Vertical and horizontal scaling (“X/Y Zoom” setting)
Automatic Scaling (“Auto Size” Setting)
The most appropriate zoom ratio based on the size of the document loaded and the
specified paper size is automatically selected.
Specifying Full Size (“
×
××
×
1.000” Setting)
A copy size that is the same as the document (×1.000) is selected.
Enlarging (“Enlarge” Settings)
Various zoom settings for making enlarged copies from common standard docu-
ment sizes to standard paper sizes are available.
For example:
G An A4-size document can be copied onto the larger A3-size paper.
G An A4-size document can be copied onto the larger B4-size paper.
Reducing (“Reduce” Settings)
Various zoom settings for making reduced copies from common standard docu-
ment sizes to standard paper sizes are available.
For example:
G An A3-size document can be copied onto the smaller A4-size paper.
G A B4-size document can be copied onto the smaller A4-size paper.