User Guide

5.2 Selecting an Output Setting

5-4 Konica 8020/8031

Specifying Copy Settings Chapter 5

Non-Sorting (“Non-Sort” Setting)

The copies are fed out and stacked on top of each other as they are printed.

Crisscross Non-Sorting (“Non-Sort” Setting)

The copies are fed out in an alternating crisscross pattern.

However, crisscross non-sorting is only performed if the follow-

ing conditions are met.

G The finisher is not installed.

G Paper of the same size and type must be loaded with the

landscape orientation (crosswise) in one paper drawer and

with the portrait orientation (lengthwise) in another drawer.

G The duplexing document feeder must be used.

G The document must not contain pages of various sizes (i.e.,

“Mixed Orig Detection” function not used).

G “Auto Paper” must be selected for the Paper setting.

G Staple and hole-punch Output settings must not be selected.

G The “Criss Cross Mode” function on the User’s Choice: 2 screen must be set to

“Yes”.

H For details on the “User’s Choice” functions, refer to “Specifying Default Set-

tings (“User’s Choice” Functions)” in the Administrator Operations volume.

Sorting (“Sort” Setting)

The copies are automatically divided into the specified number of sets with each set

containing a copy of each page.

Crisscross Sorting (“Sort” Setting)

Sets containing one copy of each page are fed out in an alter-

nating crisscross pattern.

However, crisscross sorting is only performed if the following

conditions are met.