User Guide

4.2 Feeding the Document

Konica 8020/8031 4-11

Original Documents Chapter 4

For transparent or translucent documents

Place a blank sheet of paper of the

same size as the document over

the document.

For bound documents spread over two facing pages, such as a book or maga-

zine

Position the top of the book toward

the back of the copier, as shown.

Position the document with the binding aligned with the mark on the top

document width scale.

Touch [OrigÖ Copy], and then touch [Book]. Select the desired Book setting, and

then touch [Enter].

For more details, refer to “Selecting the OrigÖ Copy Settings (Original Setting)”

(page 5-15).



Note

Do not place objects exceeding 2 kg on the platen glass. In addition, if a

book is placed on the platen glass, do not press it down extremely hard, oth-

erwise the platen glass may be damaged.

For thick books or large objects, make the copy without closing the platen

cover or duplexing document feeder. When the document is being scanned

without closing the platen cover or duplexing document feeder, do not look

directly at the light that may shine through the platen glass. The light that

shines is bright, and may cause minimal damage to some people’s eyesight.

However, the light emitted by the scanner is NOT a laser, and therefore not

extremely dangerous.