User Guide

2
2.2 Practical Copy Examples
2-6 Konica 8020/8031
Basic Copy Operations Chapter 2
To make an enlarged copy of the document
An example for making one single-sided A3-size enlargement from a single-sided
A4-size original is described below.
Load the document into the duplexing document
feeder.
When loading the document, load it so that the side
that you wish to copy faces up and the top is toward
the rear of the copier. Then, adjust the document
guides to fit the size of the document.
Touch [Zoom].
Touch [A4
Ö
A3].
Touch [Paper].
Make sure that A3-size paper is loaded into a paper
drawer.
Make sure that the number of copies is set to “1”.
Press the [START] key. The copy job appears in the
job display.
Copying is performed in the order that the job was
programmed.
A
A