User Guide

1
1.3 Names of Control Panel Parts and Their Functions
1-12 Konica 8020/8031
Before Making Copies Chapter 1
1.3 Names of Control Panel Parts and Their Functions
No. Part Name Description
1 Touch panel • Displays various screens and messages See p. 1-20.
2 [CHECK] key • Press to display the specified settings in Copy mode.
• Press to display the specified transmission settings in Scan
mode.
3 [UTILITY] key • Press to display the Utility screen.
Input
Meter Count
User’s Choice 1 & 2
Copy Program Recall
Unit life indicator
Admin. Mode
4 [ACCESS] key • Press to enter an access code.
• If no access codes have been set, nothing happens when
this key is pressed.
5 [AUTO RESET] key • Press to reset all copy modes and functions to their default
settings. (All selected settings* are canceled.)
• The current job is canceled.
*Stored zoom ratios, stored job settings, and interrupted or
delayed jobs are not canceled.
6 Keypad • Use to type in the number of copies to be made.
• Use to type in the zoom ratio.
• Use to type in the various settings.
7 [SCAN] key • Press to use this machine as a color scanner.
• When the [SCAN] key is pressed, the key indicator lights up
in green to indicate that the machine is in Scan mode.
• Scan mode is only available if the optional printer controller
is installed. If the printer controller is not installed, scanning
cannot be performed.
8 [COPY] key • Press to use this machine as a copier.
• When the [COPY] key is pressed, the key indicator lights up
in green to indicate that the machine is in Copy mode.
*Copy mode is selected as a default.
A
1 23 7
9
10
11
12
6131516
8
14 45