User Guide

1.2 Available Features
1
Konica 8020/8031 1-5
Before Making Copies Chapter 1
Output Settings
Stapling
Copies are stapled together before they are output.
Stapling is only available if the optional finisher (FS-135 or FS-231) is
installed.
Hole-punching
Holes are punched in copies before they are output.
Hole-punching is only available if the punch kit (PK-131) is installed
in the optional finisher (FS-231).
Zoom Settings
Auto Size
G This setting automatically selects the most appropriate zoom ratio based on the
size of the document loaded and the specified paper size.
Full Size
G This setting makes a copy that is the same size as the document (× 1.000).
Enlarged copies
G Zoom settings for making enlarged copies from common standard document
sizes to standard paper sizes are available.
H Example 1: An A4-size document can be copied onto the larger A3-size pa-
per.
H Example 2: An A4-size document can be copied onto the larger B4-size pa-
per.
Reduced copies
G Zoom settings for making reduced copies from common standard document siz-
es to standard paper sizes are available.
H Example 1: An A3-size document can be copied onto the smaller A4-size pa-
per.
H Example 2: A B4-size document can be copied onto the smaller A4-size pa-
per.
Minimal
G This setting slightly reduces the copy (×0.930).
H Selecting the “Minimal” setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.
Zoom copies
G Any zoom ratio (between ×0.250 and ×4.000) can be specified.
H Touch and to specify the desired zoom ratio.