User Guide

5
5.6 Selecting the Orig > Copy Settings (Copy Settings)
5-20 Konica 8020/8031
Specifying Copy Settings Chapter 5
5.6 Selecting the Orig > Copy Settings (Copy Settings)
The type of original and the desired type of copy can be specified. In addition, the
document orientation and the position of the binding margin can also be specified.
The Copy settings are described below. For details about the Original setting and
the document orientation and binding margin position, refer to p. 5-15 and p. 5-26.
The following nine Copy settings are available.
G Single-sided (“1” setting)
G Double-sided (“2” setting)
G Single-sided 2 in 1 (“1-2 in 1” setting)
G Double-sided 2 in 1 (“2-2 in 1” setting)
G Booklet (“4 in 1/Booklet” setting)
G Booklet-binding (“Booklet Creation” setting)
G Center-erasing (“Center Erase” setting)
G Single-sided 4 in 1 (“1-4 in 1” setting)
G Double-sided 4 in 1 (“2-4 in 1” setting)

Note
Double-sided, double-sided 2 in 1 and double-sided 4 in 1 copying are only
available if the optional duplex unit is installed.
Booklet-binding and center-erasing are only available if the optional finisher FS-
231 is installed.