- Network Setup and Scanner Operations Network Setup and Scanner Operations User's Guide

4-2. Method for Setting Network from Control Panel
II Network Setup - Administrators only 24
Chapter 4 Setting from the Control Panel
3 If a password is set, the key operator's password input screen is displayed. Touch the
[Password] key and input the password in the [Data Input] screen. Then, touch the
[OK] key or input the password (up to 8 digits) using the ten-keys.
4 Touch the [OK] key on the [Password Input] screen.
z The Key oper ator password is set by your service representative. If the key oper ator password has been set, the key
operator should keep the password safe on his/her own responsibility.
z For the Key operator password, please ask your service representative.
z If the [Enhanced S ecurity] is used, the password should be 8 digits.
5 Touch the [OK] key.
→ The [Key operator mode] screen is displayed on the LCD screen.
z This screen may not be displayed, depending on which options are set for [4.FAX], [5.Printer] and [6.Document
Folder].