User Guide

Storing Scanned Document (continued)

2-14

5. Press File Name, enter the file name of the document on the

Data Input screen displayed and press OK.

For detail, see "Entering Names" (p. Appendix-4).

• The file name is only for use on the copier. No file name is indicated when a scanned doc-

ument is imported to the computer.

• Scan0001 has been set as the default value.

• The numeral value increases by 1 with each documents storage.

6. Set the scanner functions as required, set the original docu-

ment and press [START] on the control panel.

• Refer to "Konica 7145 User's Manual (Network/Scanner Operations)" to setting the scan-

ner.

• See p. 3-29 for the output of documents stored in the box.

HINT

DETAIL

HINT