User Guide

Storing Copy Documents (continued)
2-9
8. When a box for which a password has been set is selected,
the Password Input screen is indicated.
Enter the password in the following procedure.
(1) Press Password.
(2) Enter the password (8 digits or less) and press OK.
(3) Press OK.
•
Enter the password in 8 digits or less.
• Password may have been fixed to 8 digits by the Box password setting function. For detail
about the Box password setting, see p.5-6.
9. Set the copy function if required, set the original document
and press [START] on the control panel.
When selecting Copy & Box Store, the scanned document is copied and stored in the
specified box.
When selecting Box Store only, the scanned document is stored in the specified box.
•
Refer to "Konica 7145 User's Manual (Copy Operations)" for the setting of the copy func-
tion.
• Refer to p. 3-4 for the output of documents stored in the box.
DETAIL
S
HINT
Storing
Documents in
Document Box
Storing Copy
Documents
Storing
Scanned
Document
2
Chapter