hyo2.fm Page 1 Tuesday, October 16, 2001 1:17 PM Energy Star® As an ENERGY STAR® Partner, we have determined that this machine meets the ENERGY STAR® Guidelines for energy efficiency. What is an ENERGY STAR® Product? An ENERGY STAR® product has a special feature that allows it to automatically switch to a “low-power mode” after a period of inactivity. An ENERGY STAR® product uses energy more efficiently, saves you money on utility bills and helps protect the environment.
Konica7115_7118.book Page i Tuesday, October 16, 2001 10:51 AM Contents Contents 1 2 3 Introduction 1.1 We Want You to Be a Satisfied Customer ..................................1-1 1.2 SAFETY INFORMATION................................................................1-2 Warning and Precaution Symbols...................................................1-2 Meaning of Symbols........................................................................1-2 WARNING...............................................
Konica7115_7118.book Page ii Tuesday, October 16, 2001 10:51 AM Contents 4 5 3.2 Components and Their Functions .............................................. 3-4 3.3 Parts Names and Their Functions .............................................. 3-6 Copier ............................................................................................. 3-6 Inside the Copier ............................................................................ 3-8 Options ...........................................
Konica7115_7118.book Page iii Tuesday, October 16, 2001 10:51 AM Contents 6 7 5.2 Selecting the Paper.......................................................................5-3 5.3 Feeding Paper Manually ...............................................................5-5 Making Copies by Using the Bypass Tray ......................................5-6 5.4 Specifying the Zoom Ratio.........................................................5-11 Setting the Zoom Ratio ......................................
Konica7115_7118.book Page iv Tuesday, October 16, 2001 10:51 AM Contents Paper Type (1st Tray)..................................................................... 7-9 Paper Type (Bypass Tray).............................................................. 7-9 Special Paper Setting ..................................................................... 7-9 Making the User’s Choice Settings............................................... 7-10 8 9 7.2 Drum Dehumidify...........................................
Konica7115_7118.book Page v Tuesday, October 16, 2001 10:51 AM Contents Conditions for Combined Functions ..............................................10-6 10.4 List of Paper Sizes and Zoom Ratios ........................................10-7 Paper Sizes...................................................................................10-7 Zoom Ratios(Original Size to Paper Size) ....................................
Konica7115_7118.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Introduction 1 Introduction 1.1 We Want You to Be a Satisfied Customer 1 Thank you for choosing a Konica 7115/7118. Instruction Manual describes the functions, operating procedures, precautions, and basic troubleshooting for the Konica 7115/7118 copier. Before using this copier, be sure to read the Instruction Manual thoroughly in order to ensure that you use the copier efficiently.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Introduction 1 1.2 SAFETY INFORMATION This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the next section before using this device.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Introduction 1 WARNING • Do not modify this product: Fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. • Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness. • Use only the power cord supplied in the package.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Introduction 1 CAUTION • Do not use flammable sprays, liquids, or gases near this product, as fire could result. • Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these substances could injure your health. • Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction.
Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Introduction 1 Precautions for Routine Use • Do not store toner units, PC drum units, or other supplies and consumables in a place subject to direct sunlight and high temperature or humidity, as poor image quality and malfunction could result. • Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct sunlight. If the PC drum is exposed to intense light, poor image quality could result.
Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Introduction 1 1.3 Safety Information Laser Safety This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the instructions in this manual. Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Introduction 1 Laser Aperture of the Print Head Unit There is a laser aperture at the location shown above, which must, however, NEVER be viewed directly by the user. CAUTION Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. This is a semiconductor laser. The maximum power of the laser diode is 5 mW and the wavelength is 770-795 nm.
Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Introduction 1 Laser Safety Label A laser safety label is attached to the outside of the machine as shown below. WARNING LABEL This internal area is very hot. To avoid getting burned DO NOT TOUCH. This area generates high voltage. If touched, electrical shock may occur.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Introduction 1 Ozone Release NOTE = Locate the Machine in a Well Ventilated Room = A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy, and safe operating environment, it is recommended that the room well ventilated.
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Introduction 1 1.4 About the Instruction Manual Explanation of Manual Conventions The marks and text formats used in this manual are described below. WARNING Failure to observe instructions highlighted in this manner may result in fatal or critical injuries. ➜ Observe all warnings in order to ensure safe use of the copier. CAUTION Failure to observe instructions highlighted in this manner may result in serious injuries or property damage.
Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Introduction 1.5 1 Explanation of Basic Concepts and Symbols The use of words and symbols in this manual are explained below. Paper Feeding During printing, paper is supplied from the right side of the copier and fed into the Exit Tray on top with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Introduction 1 “Width” and “Length” Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as “A” in the illustration) and the second to the length (shown as “B”). A: Width B: Length Paper Orientation Lengthwise ( ) If the width (A) of the paper is shorter than the length (B), the paper has a vertical or portrait orientation, indicated by either “L” or .
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Precautions 2 2 Precautions Observe the following precautions to keep the copier in the best possible conditions. 2.1 Installation Precautions Installation site To ensure utmost safety and prevent possible malfunctions, install the copier in a location that meets the following requirements: - A location away from curtains, etc.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Precautions 2 Space Requirements To ensure easy copier operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below. 1038 1065 959 1038 1524 995 Unit: mm ✎ Note Be sure to allow a clearance of 100 mm or more at the back of the copier for the ventilation duct and 150 mm or more at the right of the copier for the removal of the misfed papers.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Precautions 2.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Precautions 2 CAUTION The area around the Fusing Unit is extremely hot. ➜ Do not touch any area other than those authorized in the manual to reduce the risk of burns. Be especially careful not to touch parts marked with warning labels, and their surrounding areas. Transporting the Copier If you need to transport the copier over a long distance, consult your Tech. Rep.
Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Precautions 2.3 2 Legal Restrictions on Copying Certain types of documents must not be copied with the purpose or intent to pass copies of such documents off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible copying.
Konica7115_7118.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Before Making Copies 3.1 Available Features 3 The main copy settings available with this copier are listed below. For details on their operation, refer to the pages indicated. Copies G 1-sided copies (p.6-1) G 2in1 copies (p.6-1) G 4in1 copies (p.6-1) G Dual Page copies (p.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Zoom Ratio G Reduced/Full Size/Enlarge (p.5-11) Output G Sort (p.6-6) G Group (p.6-8) ✎ Note The Output functions available are limited according to the options equipped to the copier.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Applications G Erase (p.6-10) G Reverse Image (p.6-13) G X/Y Zoom (p.5-14) G Image Shift (p.6-14) Mixed Orig. Detection G Mixed Originals (p.4-4) ✎ Note The Mixed Orig. Detection function is available when the copier is equipped with an Automatic Document Feeder (option).
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 3.2 Components and Their Functions Copier G Konica 7115/7118 Original Cover Kit CV-117 (option) G Presses down on an original placed on the Original Glass. Standard on Konica 7115. Automatic Document Feeder DF-217 (option) G Automatically feeds originals one page after another for scanning. Paper Feed Cabinet PF-121 (option) G Capable of holding up to 250 sheets of paper.
Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Multiple Bypass MT-102 (option) G Up to 50 sheets of Paper can be loaded in the Bypass Tray. Copy Desk DK-111(S)/DK-112(M)/DK-113(L) (option) G Adjusts the height when a Paper Feed Cabinet is mounted. Fax unit for Konica 7115/7118 FK-117 (option) G Permits fax transmission using this copier.
Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 3.3 Parts Names and Their Functions Copier 1 6 2 5 3 4 9 10 11 8 7 * The above illustrations represent a copier mounted with the optional Original Cover Kit.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 No. Part Name Description 1 Copy Tray Holds copies fed out face down from the copier. 2 Front Cover Open when replacing the Toner Bottle. (p.8-8) 3 1st Tray Holds up to 250 sheets of paper and easily adjusts to different paper sizes. Special paper can be used. (p.3-22) 4 Manual Bypass Tray Use for manual feeding of paper. The paper is fed one sheet at a time. Special paper can be used. (p.
Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Inside the Copier 3 2 1 3-8 No. Part Name Description 1 Imaging Unit Forms a copy image. The Imaging Unit is to be replaced only by your Tech. Rep. 2 Toner Bottle Holder Open to replace the Toner Bottle. 3 Pressure Lever Use to clear a misfed sheet of paper at the Fusing Unit. (p.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Options 3 2 4 1 5 6 Automatic Document Feeder No. Part Name Description 1 Document Exit Tray Receives originals which have been scanned by the copier. 2 Document Guide Plate Slide the guide plate to the size of the originals. (p.4-3) 3 Document Feeder Cover (Doc. Feed Cover) Open when clearing an original that has been misfed. (p.
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 7 8 9 10 11 Paper Feed Cabinet 3-10 No. Part Name Description 7 2nd Tray 8 3rd Tray Up to 250 sheets of plain paper can be loaded. (p.8-6) Konica 7118 accepts a Paper Feed Cabinet of four trays. Konica 7115 accepts a Paper Feed Cabinet of one tray. 9 4thTray 10 5thTray 11 Side Cover Open to clear a misfed sheet of paper. (p.
Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 When Job Tray is Mounted 13 12 14 15 Shifting Unit No. Part Name Description 12 Copy Tray Receives copy sets sorted. Job Tray No. Part Name Description 13 Copy Tray Lamp Lights up when paper is fed into the Upper Copy Tray. 14 Upper Copy Tray Receives printed pages produced via the personal computer or faxes received. 15 Lower Copy Tray Receives copies made.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 3.4 Control Panel Names of Control Panel Parts and Their Functions 1 2 3 4 5 6 11 13 12 14 10 9 8 15 16 7 18 17 21 22 27 3-12 26 25 24 19 23 20 No. Part Name Description 1 PRINT • Lit while data received from personal computer is being printed. Blinks while data is being transferred. For details, refer to the Printer Controller User Manual.
Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 No. Part Name Description 7 ERASE • Press to select the erase position. 8 OUTPUT • Press to select the output function. 9 IMAGE SHIFT • Press to select the Image Shift mode. 10 X/Y ZOOM • Press to make a copy with different zoom ratios set for X (horizontal) and Y (vertical) directions. 11 JOB RECALL • Press to recall either one of the two jobs previously stored in memory.
Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Icons on the Control Panel Icon 3-14 Name Description Paper Misfeed indicator Lights up when a paper misfeed occurs in the copier. Malfunction indicator Lights up when a malfunction occurs in the copier. Maintenance indicator Blinks or lights up when the time approaches that copier needs maintenance service. Call your Konica Service Centre.
Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3.5 3 Turning ON and OFF and the Initial Mode How to Turn ON/OFF the Copier Turning Copier ON: ➜ Press the Power Switch to the 1 (ON) position. Turning Copier OFF: ➜ Press the Power Switch to the 2 (OFF) position. ✎ Note Do not turn OFF the copier while a copy cycle is being run, as paper misfeed will result. Before attempting to turn OFF the copier, always be sure that the current copy cycle has been completed.
Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Default Settings When the copier is turned ON, the function indicators on the control panel will indicate the default settings which serve as the reference for all control panel settings to be made later.
Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3.6 3 Useful Functions Auto Resetting Press the [AUTO RESET] key to return all modes and functions (zoom ratio, number of copies, etc.) to their defaults. (All selected settings are canceled.) ✎ Tip The [AUTO RESET] key comes in handy for canceling all selected settings at one time.
Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Power Save Instead of turning OFF the copier, it can be set into a standby state (Power Save mode). To set the copier into the Power Save mode, press the [POWER SAVE] key. In addition, if the copier is not used for a set length of time, it will automatically enter the Power Save mode. The default length of time is 15 min. To cancel the Power Save mode, press any key on the control panel.
Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Interrupting Copy Jobs During a long continuous copy or print cycle, the copier may be needed to quickly run a different job. To interrupt a current job, press the [INTERRUPT] key. Press the [INTERRUPT] key a second time to return to the stopped job. ✎ Note Depending on the specific settings made, the current job may reject the Interrupt mode. Also, some functions are not available for the Interrupt mode.
Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Account Number If account numbers have been programmed, use of the copier can be limited to certain people or to a specified number of copies for each account. ✎ Note If account numbers have been programmed, the copier cannot be used unless the specific account number is entered first. To use this function, set “Copy Track” of “Administrator Mode” under the Utility mode. (p.
Konica7115_7118.book Page 21 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Printing from the Personal Computer When the optional printer controller is installed, the copier can be used as a printer configured to a computer network. For details of operation, refer to the Printer Controller User Manual. Sending and Receiving Faxes Using the Copier When the optional Fax unit is mounted, fax transmission can be made using this copier.
Konica7115_7118.book Page 22 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 3.7 Copy Paper Paper Specifications The following table specifies the type and size of paper to be used with each tray together with its capacity.
Konica7115_7118.book Page 23 Tuesday, October 16, 2001 10:51 AM Before Making Copies 3 Precautions for Loading Paper G Be sure to stick to the paper specifications for each tray, i. e., the paper type, paper size, and capacity, as a paper misfeed could result otherwise. G When loading paper of the inch system (Letter, Legal etc.) in the tray, change “Paper Auto Detection” of the User’s Choice. (p.7-9) G The Inch lamp lights if paper of the inch system (Letter, Legal etc.) is loaded in the tray.
Konica7115_7118.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 4 Loading Originals 4.1 Two Ways of Loading the Original The original may be loaded in the Automatic Document Feeder or placed directly on the Original Glass. Choose the appropriate method according to the type of the original.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 4.2 Loading Originals in the Automatic Document Feeder The Automatic Document Feeder automatically feeds originals one page after another and lets the copier scan the data on each original. After the copier completes scanning the data, the Automatic Document Feeder ejects it into its tray. To ensure the best possible performance of the Automatic Document Feeder, use only originals of the appropriate type.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 Loading the Originals 1 Slide the front adjustable Document Guide Plate to the size of the originals. 2 Place the stack of originals face up on the Document Feeder Tray. ? Is the stack of originals neat? ➜ The maximum number of originals that can be loaded is 50. ➜ Be sure that the top level of the original stack does not exceed the Ä marking.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 Mixed Originals A stack of originals of different sizes can be copied as a set using the Automatic Document Feeder. Originals Copies (APS) ✎ Note This feature can be used only if the width of the originals is the same. E.g.: A3L and A4C Making Copies from Originals of Mixed Sizes 1 Slide the front adjustable Document Guide Plate to the front of the copier.
Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 3 Press the front adjustable Document Guide Plate tightly up against the front edges of the originals. ? Is the stack of originals neat? ➜ The maximum number of originals that can be loaded is 50. ➜ Be sure that the top level of the original stack does not exceed the Ä marking. ➜ Be sure that the Document Guide Plates touch both the front and rear edges of the original stack.
Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 4.3 Place the Original on the Original Glass The method for positioning the original differs depending on the type of original being used. Be sure to use the appropriate method that best suits the type of original. Refer to p.4-2 for information on using the Automatic Document Feeder. Precautions for Placing the Original on the Original Glass Care should be used when positioning the following types of originals.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 How to position a sheet original Use the following procedure to position plain paper or an original that is not suitable for use in the Automatic Document Feeder. 1 Raise the Automatic Document Feeder or Original Cover. 2 Place the original face down on the Original Glass. 3 Position the original in the left rear corner aligned with the marker on the scale. 4 Gently lower the Automatic Document Feeder or Original Cover.
Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 Highly Transparent Originals When making a copy from OHP transparencies, translucent paper, or other highly transparent original, position the original as detailed below. 1 Raise the Automatic Document Feeder or Original Cover. 2 Place the original face down on the Original Glass. 3 Position the original in the left rear corner aligned with the marker on the scale.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Loading Originals 4 Books When copying an open book or magazine, position the original as detailed below. 1 Raise the Automatic Document Feeder or Original Cover. 2 Position the book face down on the Original Glass, with the top of the book toward the rear of the copier and the center of the open book aligned with the book mark ( ) on the scale.
Konica7115_7118.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Making Copies 5 5 Making Copies 5.1 Copying The following procedure describes how to place an original and make a basic copy of it. Making a Basic Copy 1 Position the original. ❍ Original Loading (p.4-1) 2 Make the necessary control panel settings. ❍ ❍ ❍ Selecting the Paper (p.5-3) Zoom Ratio (p.5-11) Image Density (p.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Making Copies 5 3 Enter the number of copies to be made from the Key Pad. Any number from 1 to 99 can be entered. 4 Press the [START] key. This will start the copy cycle. To stop the copy cycle in midoperation, press the [STOP] key.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Making Copies 5.2 5 Selecting the Paper Before making a copy, the tray containing the paper to be used must be selected. Either the paper source is selected automatically when the size of the original is detected, or you specify the specific paper source manually. G APS: When “APS” is selected, the tray containing the most suitable size of paper is selected based on the size of the original and the set zoom ratio.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Making Copies 5 Manual Paper Selection 1 Position the original. ❍ Original Loading. (p.4-1) 2 Press the [PAPER SIZE] key on the control panel until the desired paper size indicator lights. 3 Make the other necessary settings. ❍ ❍ Zoom Ratio (p.5-11) Image Density (p.5-16) 4 Enter the number of copies to be made from the Key Pad and press the [START] key.
Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Making Copies 5.3 5 Feeding Paper Manually Paper can be fed manually through the Bypass Tray if you want to copy onto paper that is not loaded in any tray, or if you want to copy onto special paper, such as OHP transparencies, postcards, or cards.
Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Making Copies 5 Making Copies by Using the Bypass Tray 1 Position the original. ❍ Original Loading (p.4-1) 2 Slide the Paper Guides to the size of the paper. Load a sheet of paper so that the front side of the paper faces down. At this time, gently insert the paper until it is stopped. Note that the Bypass Tray location indicator on the control panel lights.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Making Copies 5 5 Make any other necessary settings. ❍ ❍ Zoom Ratio (p.5-11) Image Density (p.5-16) 6 Press the [START] key. ✎ Tip If the same settings apply to the second and subsequent sheets of paper, you have only to load the paper in the Bypass Tray: This will automatically start the new copy cycle. ✎ Tip To make copies continuously on cards, OHP transparencies, or postcards, load the paper in the 1st Tray. Refer to “Copy Paper”(p.
Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Making Copies 5 1 Position the original. ❍ Original Loading (p.4-1) 2 Adjust the Paper Guides and the Bypass Tray Extender to the size of the paper. Load a stack of paper so that the front side of the paper faces down. At this time, gently insert the paper stack until it is stopped. Note that the Bypass Tray location indicator on the control panel lights.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Making Copies 5 1 Slide the Paper Guides to the size of the paper. Gently insert the paper with the front side of the paper facing down until it is stopped. Note that the Bypass Tray location indicator on the control panel lights. 2 Press the [BYPASS TRAY] key until the Custom Size indicator blinks. 3 Press the [ENTER] key. 4 Press the [CLEAR] key to clear the old value shown on the Display.
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Making Copies 5 5 Enter the length (mm) of the paper from the Key Pad. you know what is the range ? Do for the paper length of custom size? ➜ The length can range from 140 mm to 432 mm. you want to change the value ? Do just entered? ➜ Press the [CLEAR] key and then re-enter the new value. are the precautions for ? What entering a custom size? ➜ Width Length Note the conventions for the paper dimensions, width and length.
Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Making Copies 5.4 5 Specifying the Zoom Ratio By specifying a zoom ratio, the copy can be enlarged or reduced. Types of Zoom Ratio Setting Description AMS This setting automatically selects the most appropriate zoom ratio based on the size of the original loaded and the paper size selected for use. The copier must be equipped with an Automatic Document Feeder.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Making Copies 5 Setting the Zoom Ratio 1 Position the original. ❍ Original Loading (p.4-1) 2 Press the [APS/AMS] key on the control panel until the AMS indicator lights. 3 Press the [PAPER SIZE] key on the control panel until the desired paper size indicator lights. 4 Make any other necessary settings. ❍ Image Density (p.5-16) 5 Enter the number of copies to be made from the Key Pad and then press the [START] key.
Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Making Copies 5 1 Position the original. ❍ Original Loading (p.4-1) 2 Press the [RE] key on the control panel until the desired zoom ratio indicator lights. ❍ To set a custom zoom ratio, press [ ] or [ ] key to reach the desired ratio. Pressing this key changes the ratio in 1% increments. 3 Make any other necessary settings. ❍ ❍ Paper (p.5-3) Image Density (p.
Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Making Copies 5 X/Y Zoom This setting allows you to enter the zoom ratio for X and Y independently from the Key Pad. 1 Position the original. ❍ Original Loading (p. 4-1) 2 Press the [X/Y ZOOM] key on the control panel to light the X/Y ZOOM indicator. 3 Press the [CLEAR] key to clear the old value for X (length). 4 First, enter the zoom ratio (%) for X (length) from the Key Pad and then press the [ENTER] key.
Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Making Copies 5 5 Press the [CLEAR] key to clear the old value for Y (width). 6 Enter the zoom ratio (%) for Y (width) from the Key Pad and then press the [ENTER] key. you know the range for the ? Do value Y in X/Y Zoom? ➜ The ratio can range from 50% to 100%. 7 Make any other necessary settings. ❍ Image Density (p.5-16) 8 Enter the number of copies to be made from the Key Pad and then press the [START] key.
Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Making Copies 5 5.5 Adjusting the Image Density The image density setting can be adjusted in two broad modes, “Text” and “Photo.” Image Density Setting G Text mode: The image density can be adjusted either automatically (Auto) or manually in five steps. ❍ The image density is adjusted automatically according to the original from which a copy is to be made.
Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Making Copies 5 3 If you want to adjust the image density manually, press the [ [ ] key to select the desired setting. ] or ? Do you know how to select Photo? ➜ Light the MANUAL/PHOTO indicator. In the Photo mode, Auto cannot be selected. ? Do you know what to do after selecting Manual? ➜ Refer to the diagram on the right for the relationship between the control panel indication and image density.
Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Making Copies 5 5.6 Interrupting a Copy Job By selecting the [INTERRUPT] key, a multi-copy cycle can be stopped at any time to make an urgent copy. ✎ Note Some functions cannot be interrupted. Also, some settings may not be available when a copy job is interrupted. For more details, refer to the “Function Combination Table” (p.10-6). To Interrupt a Copy Job 1 Press the [INTERRUPT] key.
Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Making Copies 5 3 Make any other necessary settings. ❍ ❍ ❍ Paper (p.5-3) Zoom Ratio (p.5-11) Image Density (p.5-16) 4 Enter the number of copies to be made from the Key Pad and then press the [START] key. This will start the interrupt copy cycle. 5 After the interrupt copy has been made, press the [INTERRUPT] key. The Interrupt indicator will go out and the settings will be recovered for the interrupted copy job.
Konica7115_7118.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 Advanced Copying 6.1 Making 1-Sided Copies 6 This section describes the setting combinations for the various types of originals and copies and the procedure for selecting the appropriate settings to produce the intended results. The [ORIGINAL] key and the [COMBINATION] key on the control panel allow you to make the various setting combinations.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 Dual Page: ➜ The copier makes 1-sided page-bypage copies of an open book. Original Copies Making Settings for 2in1 and 4in1 Copies 1 Load the originals in the Automatic Document Feeder. ❍ Original Loading (p.4-1) 2 Press the [COMBINATION] key to light either the 2in1 or 4in1 indicator. 3 Make any other necessary settings. 4 Enter the number of copies to be made from the Key Pad and then press the [START] key.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 Making Settings for Dual Page Copies 1 Position the original. ❍ Original Loading (p.4-1) 2 Press the [ORIGINAL] key to light the DUAL PAGE indicator. your book left-bound or right? Isbound? ➜ User’s Choice allows you to select the type of book. The default setting is left-bound. If your book is right-bound, change the setting for “Book Binding Position.” (p.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 ? Do you know how to set the erase width for each erase function? ➜ The frame erase width can be set in the range between 5 mm and 20 mm, variable in 1-mm increments. The default value is 10 mm. ➜ Only 10 mm is available for the center erase width. ➜ To change the setting for the frame erase width, use “Erase Setting” of User’s Choice. (p.7-8) 4 Make any other necessary settings.
Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6.2 6 Output Copies (Sort and Group) When copying or printing two or more copies of a document, the copies can be divided either by sets containing a copy of each page (Sort) or by pages (Group). Three Output Types Non-Sort: ➜ The copies are stacked on top of each other as they are made.
Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 Sorting The copies are automatically divided into sets with each set containing a copy of each page. The following three types are available: electronic sorting, shift sorting, and crisscross sorting. What is electronic sorting? Important) ✔ The copier must be equipped with an Automatic Document Feeder. ➜ The copies are sorted into complete sets of the originals.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 What is crisscross sorting? Important) ✔ The copier must be equipped with an Automatic Document Feeder, 16MB Memory for Copier or 32MB Memory for Copier and Paper Feed Cabinet or Multiple Bypass Tray. ➜ The sorted copy sets are stacked in a crisscross manner, one set stacked lengthwise on top of another set stacked crosswise.
Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 Grouping The copies are automatically divided into stacks with each stack containing copies of the same page. The following two types are available: shift grouping and crisscross grouping. What is shift grouping? Important) ✔ The copier must be equipped with an Automatic Document Feeder and a Shifting Unit.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 ✎ Note Crisscross grouping cannot be effected if a Shifting Unit is mounted. Choosing a set for Output 1 Load the originals in the Automatic Document Feeder. ❍ Original Loading (p.4-1) 2 Press the [OUTPUT] key to select the desired output function. you know what it means ? Do when both Sort and Group lamps are off? ➜ It means that Non-Sort is currently selected for use. 3 Make any other necessary settings.
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 6.3 Erasing Part of Original Image (Erase) The copier erases a margin of a set width along the edges or erases any other unwanted images. One of the following four different erase functions can be selected: What is Left Erase? ➜ A given width is erased from the left edge of the copy. Original Copy Original Copy Original Copy What is Upper Erase? ➜ A given width is erased from the top edge of the copy.
Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 ✎ Tip Frame + Center Erase can be set only if Dual Page has been selected. (p.6-3) Precautions for Erase Position Note the correct direction of positioning the original when making copies in the Erase mode. For more details, refer to the table given below.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 Setting the Erase Function 1 Position the original. ❍ Original Loading (p.4-1) 2 Press the [ERASE] key to light the desired erase position indicator. you know how to set the ? Do erase width for each erase function? ➜ The Left, Upper, and Frame erase width can be set in the range between 5 mm and 20 mm, variable in 1-mm increments. The default value is 10 mm. ➜ Only 10 mm is available for the Center erase width.
Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6.4 6 Reversing Original Tonal Arrangements The white part (background) and the black part (text) are reversed on the copy. Original Copy Reverse Image 1 Position the original. ❍ Original Loading (p.4-1) 2 Press the [REVERSE IMAGE] key and make sure that the Reverse Image indicator. 3 Make any other necessary settings. 4 Enter the number of copies to be made from the Key Pad and then press the [START] key.
Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Advanced Copying 6 6.5 Providing a Image Shift The copier provides a file margin along the leading edge for ease in filing. What is Image Shift? ➜ Original Copy The image of the original is shifted to the right to leave a margin along the left edge of the copy. Precautions for Image Shift Position Study the illustration below to be sure of the correct direction of placing the original when making a copy with a file margin.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7 Using the Utility Mode The Utility mode offers the following subfunctions. Code Name Description 1 User’s Choice Allows you to select the default setting for each of the various functions. 2 Drum Dehumidify Removes dewdrops that have formed on the surface of the PC Drum. 3 Toner Replenisher Replenishes the supply of toner to make up for a lower toner-to-carrier ratio.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7.1 User’s Choice The functions set and established on the control panel when the copier is turned ON or the [AUTO RESET] key is pressed are called the default settings. These settings can be modified by selecting User’s Choice. Refer to the table given below for the code and default value of each function. Code 1 2 3 7-2 Name Mixed Orig. Paper Priority Copy Priority Setting Setting Details 0 Mixed Orig.
Konica7115_7118.
Konica7115_7118.
Konica7115_7118.
Konica7115_7118.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Density Level Priority (Manual) Set the default value of the density level for the Manual exposure mode. The image becomes lighter toward a smaller number and darker toward a larger number, with “3” as the central value. G The default value is “3.” Output Priority Choose the output function to be selected automatically when power is turned ON or panel reset from among “Non-Sort,” “Sort,” or “Group.
Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Erase Setting (Left, Top, and Frame) Set the erase width for each of the Left, Top, and Frame Erase copies in the range between 5 mm and 20 mm (in 1-mm increments). G The default value is “10 mm” for Left, Upper, and Frame Erase. Auto Panel Reset Select the time it takes the auto panel reset function to be activated from among “30 seconds,” “1 min,” “2 min,” “3 min,” “4 min,” or “5 min,” or not activated at all.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Paper Auto Detection Select “Metric” if the size of the paper loaded in each tray is designated according to the metric system, such as A4 and B4. Select “Inch” if the size of the paper loaded in each tray is designated according to the inch system, such as Letter. G The default value is “Metric.” Paper Size Detection Select whether to “automatically detect” or “input size” for the paper loaded in the 1st Tray.
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Making the User’s Choice Settings User’s Choice Setting Procedure 1 Call the Utility Mode to the Display. ❍ Calling the Utility Mode to the Display (p.7-1) 2 Making sure that “U--” appears on the Display, enter “1” from the Key Pad. 3 Press the [START] key. 4 Check that “c--” appears on the Display. 5 Enter the code assigned to the desired function from the Key Pad. E.g.
Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7 Press the [CLEAR] key. This clears the current setting. 8 Enter the new setting from the Key Pad. E.g.: Enter “2” to change Copy Priority to “Manual.” you want to correct the ? Do setting just entered? ➜ Press the [CLEAR] key and then enter the new setting. 9 Press the [START] key. To further change the setting for another function, repeat steps 4 through 9.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7.2 Drum Dehumidify During times of high humidity or when there are sudden rapid changes in humidity (especially when you are using a heater in winter), condensation can form on the surface of the PC Drum, resulting in blotchy copies. In such instances, use the “Drum Dehumidify” function to dry the surface of the PC Drum. ✎ Tip A copy or print cycle can be run while in the Drum Dehumidify mode.
Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7.3 7 Toner Replenisher (Auxiliary Toner Replenishing) The copier tends to exhaust the supply of toner rapidly when making a number of copies from an original with dark solid areas, such as a photo. As a result, the image density of the copy will become lighter. In such a case, you can use Toner Replenisher to quickly restore the normal image density.
Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7.4 Custom Size Input When paper of a nonstandard size is to be loaded in the 1st Tray, use this function to set the custom size. ✎ Note Before making this setting, be sure to select “size input” for “Paper Size Detection” of User’s Choice. ✎ Tip To make sure that the correct values are entered, refer to the illustration on the right to study the convention of the paper length and width.
Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 4 Press the [CLEAR] key. 5 Enter the value of X (length) of the paper to be loaded from the Key Pad. E.g.: Paper length 300 mm you want to change the value ? Do just entered? ➜ Press the [CLEAR] key and then enter the new value. ? Do you know the range for the paper length of custom size? ➜ The length can range from 140 mm to 432 mm. 6 Press the [START] key. 7 Press the [CLEAR] key.
Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7.5 Administrator Mode Administrator Mode The Administrator Mode is for the administrator of your copier. When Administrator Mode is selected, it is then necessary to enter the administrator number. The Administrator Mode offers two functions to be set: “Copy Track” and “Disable Auto Shut OFF.” Study the table given below and make the appropriate setting according to operating needs.
Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 4 Enter the 6-digit administrator number from the Key Pad. you know how to enter the ? Do administrator number? ➜ Enter the six digits successively. you want to correct a wrong ? Do number just entered? ➜ Press the [CLEAR] key and then enter the correct number. 5 Press the [START] key. 6 Check that “Ad-” appears on the Display. 7 Enter the code assigned to the desired subfunction from the Key Pad.
Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Copy Track Copy Track allows the administrator to keep track of the number of copies made by each account for a total of up to 20 different accounts. Code A-1 Name Copy Track Setting Setting Details 0 Copy Track enabled 1 Copy Track disabled 2 A-2 Input Account - Program a 3-digit account number. - A-3 Delete Account - Delete a 3-digit account number previously stored.
Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 4 Making sure that “A--” appears on the Display, enter “1” from the Key Pad. 5 Press the [START] key. 6 Select whether to “enable” or “disable” Copy Track by entering the corresponding number from the Key Pad. you know the code for ? Do “enabling” Copy Track? ➜ To enable Copy Track, enter “0.” ? Do you know the code for “disabling” Copy Track? ➜ To disable Copy Track, enter “1.” 7 Press the [START] key.
Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Input Account Procedure (A-2) 1 Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) 2 Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad. 3 Press the [START] key. 4 Making sure that “A--” appears on the Display, enter “2” from the Key Pad. 5 Press the [START] key. 6 Enter the 3-digit account number from the Key Pad.
Konica7115_7118.book Page 21 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Delete Account Procedure (A-3) 1 Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) 2 Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad. 3 Press the [START] key. 4 Making sure that “A--” appears on the Display, enter “3” from the Key Pad. 5 Press the [START] key. 6 Press [ ] or [ ] key to select the account number to be deleted.
Konica7115_7118.book Page 22 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Change Account Procedure (A-4) 1 Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) 2 Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad. 3 Press the [START] key. 4 Making sure that “A--” appears on the Display, enter “4” from the Key Pad. 5 Press the [START] key. 6 Press [ ] or [ ] key to select the account number to be changed.
Konica7115_7118.book Page 23 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Total Counter Display by Account Procedure (A-5) 1 Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) 2 Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad. 3 Press the [START] key. 4 Making sure that “A--” appears on the Display, enter “5” from the Key Pad. 5 Press the [START] key.
Konica7115_7118.book Page 24 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 8 The Display will show the Total Counter value. E.g.: If the Total Counter value is 1,234, then the Display will show something like that shown on the right. you know how to reset the ? Do Total Counter value? ➜ Press the [CLEAR] key. 9 Press the [START] key. Then, the Display returns to the status that allows you to select the account number, in step 6.
Konica7115_7118.book Page 25 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Total Counter Clear for All Accounts Procedure (A-6) 1 Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.7-16) 2 Making sure that “Ad-” appears on the Display, enter “1” from the Key Pad. 3 Press the [START] key. 4 Making sure that “A--” appears on the Display, enter “6” from the Key Pad. 5 Press the [START] key. 6 Check that the Display shows “CLr.
Konica7115_7118.book Page 26 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Disable Auto Shut OFF The Disable Auto Shut OFF function allows the administrator to “authorize” or “not authorize” the selection of “Auto Shut OFF disabled” under User’s Choice. G The default value is “not authorized.” Setting Disable Auto Shut OFF 1 Call the Administrator Mode to the Display. ❍ Calling the Administrator Mode to the Display (p.
Konica7115_7118.book Page 27 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 5 Enter the new setting from the Key Pad. you know the number for ? Do “authorize” Disable Auto Shut OFF? ➜ Enter “0.” 6 Press the [START] key. This validates the new setting.
Konica7115_7118.book Page 28 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7.6 Checking the Total Number of Copies/Prints Produced The [COUNTER] key on the control panel allows you to check the total number of copies or printed pages produced since the installation of the copier. It provides the following information. G Total Counter: Shows the total number of copies or printed pages produced since the installation of the copier.
Konica7115_7118.book Page 29 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 3 If you want to also check the Size Counter, press the [COUNTER] key a second time. 4 Check that “Sc” appears on the Display. The Size Counter value is then displayed. E.g.: The Display looks like the one shown on the right when the value is 123. 5 After you have checked the counter value or values, press the [COUNTER] key. Then the original display reappears.
Konica7115_7118.book Page 30 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 7.7 Storing a Job You can store frequently used job settings in memory to call up later for quick job setup. Up to two different settings can be stored: job 1 (Jb1) and job 2 (Jb2). ✎ Note No jobs can be stored while the copier is warming up or is in the Interrupt mode. Job Storing Procedure 1 Set up the job you want to store in memory. 2 Press the [JOB STORE] key. 3 Check that “Jb1” appears on the Display.
Konica7115_7118.book Page 31 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 4 Press the [ENTER] key. 5 The Display changes as shown on the right, indicating that the job has been stored in Jb1.
Konica7115_7118.book Page 32 Tuesday, October 16, 2001 10:51 AM Using the Utility Mode 7 Recalling a Job from Memory 1 Position the original. ❍ Original Loading (p.4-1) 2 Press the [JOB RECALL] key to show the job number to be recalled on the Display. 3 Check that the Display shows the job number you want. you know how to change the ? Do contents of the Display? ➜ Each time the [JOB RECALL] key is pressed, the Display alternates between “Jb1” and “Jb2.” 4 Press the [ENTER] key.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 8 Error Displays and Other Indicators 8.1 Major Error Displays and Remedial Actions Error Display Possible Cause Action Toner has run out and the copier is no longer able to make copies. Install a new Toner Bottle. “Replacing the Toner Bottle” (p.88) Paper of good size is not available for the copy cycle in the APS mode.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 Error Display 8-2 Possible Cause Action A sheet of misfed paper is left in the copier. Identify the misfeed location on the control panel and remove the sheet of misfed paper. “Clearing a Paper Misfeed” (p.8-12) A sheet of paper is left on the Manual Bypass Tray. Remove the paper from the Manual Bypass Tray. Copier cover is left open or not closed in position.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators Error Display 8 Possible Cause Action The Imaging Unit needs replacement. Call your Tech. Rep. A malfanction has occurred in the copier. Turning OFF, then ON, the copier will minor malfunciton. If this does not reset the minor malfunction, call your Konica Service Centre and give him or her the malfuncion code being shown on the Display. E.g.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 8.2 When the Add Paper Indicator Lights up If paper runs out during a copy cycle, the Add Paper indicator lights up and the copy cycle is stopped. Identify the specific tray that has run out of paper on the control panel. Then, following the procedure given in “Adding Paper” below, add paper as necessary. Adding Paper <1st Tray> 1 Slide out the 1st Tray.
Konica7115_7118.book Page 5 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 3 Load the paper in the tray so that the front side of the paper (the side facing up when the package was unwrapped) faces up. you loaded too much ? Have paper in the tray? ➜ Do not load so much paper that the top of the stack is higher than the Ä mark. 4 Slide the Edge Guide and Trailing Edge Stop against the edges of the paper stack.
Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 <2nd Tray> The same procedure applies when loading paper in the 3rd Tray, 4thTray, and 5thTray. 1 Slide out the 2nd Tray. 2 Press down on the Paper Lifting Plate until it clicks into the locked position. 3 Load the paper in the tray so that the front side of the paper (the side facing up when the package was unwrapped) faces up.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 1 Load the paper in the Bypass Tray. you know the special ? Do precautions to be used when loading the paper? ➜ Be sure to face the surface to be copied onto down. ➜ Do not load so much paper that the top of the stack is higher than the Ä mark. ➜ Be sure to smooth any curl in the paper before loading it.
Konica7115_7118.book Page 8 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 8.3 When the Add Toner Indicator Lights up When toner is low, the Add Toner indicator lights up as shown in the illustration. Replace the Toner Bottle with a new one as soon as possible. ✎ Note Use only the toner that has been manufactured specifically for this copier. Never use any other types of toner, as a malfunction could result. For details, ask your Tech. Rep.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 3 Sharply tap the new Toner Bottle against a desk or other hard surface four or five times. Then turn the Toner Bottle upside down and tap it the same way again. ❍ Be sure to carry out this procedure, as toner can be caked in the bottle. 4 Shake the new Toner Bottle well. 5 With the “UP” marking on top, insert and push the bottle into position.
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 7 Push the Toner Bottle Holder back in and then close the Front Cover. ❍ ? ➜ 8-10 Toner will be automatically supplied as soon as the Front Cover is closed. Do you know what to do if the copy image density is still low immediately after the Toner Bottle has been replaced with a new one? Run “Toner Replenisher” of Utility Mode. (p.
Konica7115_7118.book Page 11 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8.4 8 When the Paper Misfeed Indicator Lights If a paper misfeed occurs during a copy cycle, the Paper Misfeed indicator lights and the copy cycle is stopped. Following the misfeed clearing procedures given below, remove all misfed sheets of paper. Misfeed Indications and Misfeed Locations A blinking lamp indicates that there is a misfed sheet of paper.
Konica7115_7118.book Page 12 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 Clearing a Paper Misfeed CAUTION The area around the Fusing Unit is extremely hot. ➜ Do not touch any area other than the authorized knobs, to reduce the risk of burns. CAUTION There are a number of protrusions on the backside of the guide plate. ➜ To avoid possible injury, be careful not to touch any areas other than the paper. 1 Open the Side Cover of the copier.
Konica7115_7118.book Page 13 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 3 Gently pull out the sheet of paper. 4 Lowering the guide plate, gently pull out the sheet of paper. you know which part to ? Do grasp? ➜ Grasp the green portions to lower the guide plate. 5 Turning the knob of the roller in the direction of the arrow, gently pull out the sheet of paper. you know which part to grasp ? Do to turn the roller? ➜ Be sure to grasp the green knob to turn the roller.
Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 7 Close the Side Cover of the copier. 8 Slide out the 1st Tray and remove the paper stack left in it. Reload the paper stack in the 1st Tray. 9 Slide the Edge Guide and Trailing Edge Stop against the edge of the paper stack.
Konica7115_7118.book Page 15 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 1 Open the Side Cover of the Paper Feed Cabinet. 2 Gently pull out the sheet of misfed paper. 3 Close the Side Cover of the Paper Feed Cabinet.
Konica7115_7118.book Page 16 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 1 Unload the paper stack from the Bypass Tray. 2 Open the Side Cover of the copier. 3 Gently pull out the sheet of misfed paper. 4 Close the Side Cover.
Konica7115_7118.book Page 17 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 5 Load the paper stack back in the Bypass Tray.
Konica7115_7118.book Page 18 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 1 Open the Document Feeder Cover. 2 Unload the document from the Document Feeder Tray. 3 Raise the Automatic Document Feeder.
Konica7115_7118.book Page 19 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 4 Turning the document feed knob in the direction of the arrow, gently pull out the original. 5 Close the Document Feeder Cover.
Konica7115_7118.book Page 20 Tuesday, October 16, 2001 10:51 AM Error Displays and Other Indicators 8 6 Reload the document which has been unloaded in step 2. you know what to do if “-1” is ? Do shown on the Display? ➜ 8-20 Merge the original which has been misfed with the remaining pages of the document for reloading.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips 9 9 Troubleshooting Tips 9.1 When This Type of Copy is Produced Symptom Possible Cause Action The image is too light. The image density is set at “Lighter.” Adjust the image density to the darker side. (p.5-16) The paper is damp. Change the paper. (p.8-4) The image density is set at “Darker.” Adjust the image density to the lighter side. (p.5-16) The original is not placed firmly against the Original Glass.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips 9 Symptom Possible Cause Action The copy has lines. The Original Glass surface is dirty. Wipe the Original Glass clean with a soft dry cloth. (p.10-5) The Original Pad is dirty. Wipe the Original Pad clean with a soft cloth dampened with neutral detergent. (p.10-5) The original is highly transparent. Place a blank sheet of paper over the original. (p.4-8) The original is 2-sided.
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips 9 Symptom Possible Cause Action The image on the copy is not aligned properly. The original is not placed in the correct position. Place the original correctly on the Original Glass against the Original Width Scale. (p.4-7) Or, load it in the Automatic Document Feeder correctly along the Document Guide Plates. (p.4-3) The original may not be suitable for use in the Automatic Document Feeder.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Troubleshooting Tips 9 9.2 9-4 When the Copier is not Operating Correctly Symptom Possible Cause Action Nothing is indicated on the control panel. Only the [START] key lights green. The copier is in the Power Save mode. Press any key on the control panel to leave the mode. (p.3-18) The Auto Shut OFF function has been activated. Turn OFF, then ON, the Power Switch. (p.3-15) The [START] key does not light green.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Appendix 10 10 Appendix 10.
Konica7115_7118.book Page 2 Tuesday, October 16, 2001 10:51 AM Appendix 10 10-2 Specifications Konica 7115 Lost Image Leading Edge: 4 mm Trailing Edge: 4 mm Rear Edge: 4 mm Front Edge: 4 mm Power Requirements 220V to 240V, 15 A, 50/60 Hz Power Consumption 1.5 kW or less Dimensions Width: 590 mm Depth: 611 mm Height: 487 mm Weight 38.
Konica7115_7118.
Konica7115_7118.book Page 4 Tuesday, October 16, 2001 10:51 AM Appendix 10 Shifting Unit IS-101 Specifications Shift Position 28mm Capacity 250 sheets Power Consumption 63 W or less Job Tray IT-102 Specifications Kinds of Paper Plain paper (60g/m2 to 90 g/m2),recycled paper Special paper: card (91 g/m2 to 157 g/m2), OHP transparencies, postcards, labels Capacity • Plain paper (80g/m2), recycled paper: A4 100 sheets, sizes other than A4 50 sheets (max.
Chapter10.fm Page 5 Tuesday, October 16, 2001 1:16 PM Appendix 10.2 10 Care of the Copier Cleaning Turn OFF the copier before cleaning it. Housing Cover ➜ Wipe the surface of the housing cover with a soft cloth dampened with a mild household detergent. Original Pad ➜ Wipe the surface of the Original Pad clean with a soft cloth dampened with alcohol. Platen Glass ➜ Wipe the surface of the Platen Glass clean with a soft, dry cloth.
Konica7115_7118.book Page 6 Tuesday, October 16, 2001 10:51 AM Appendix 10 10.3 Function Combination Table Function Combination Table Function Set Last Conditions for Combined Functions 10-6 Code Description 2 The functions can be combined. ● The functions cannot be combined. (The function set first takes precedence.) × The functions cannot be combined. (The function set last takes precedence.) A The function set first takes precedence if paper is loaded in the Bypass Tray.
Konica7115_7118.book Page 7 Tuesday, October 16, 2001 10:51 AM Appendix 10.
Konica7115_7118.
Konica7115_7118.book Page 9 Tuesday, October 16, 2001 10:51 AM Appendix 10 Metric Areas Original Size Paper Size Zoom Ratio B5 182mm × 257mm 7-1/4 × 10 A5 81% A6 57% B6 70% A3 163% A4 115% B4 141% A6 81% A4 164% A5 115% B4 200% B5 141% Original Size Paper Size Zoom Ratio Ledger 11 × 17 279.4mm × 431.8mm 11 × 14 82% Legal 77% B6 128mm × 182mm 5 × 7-1/4 Inch Areas 11 × 15 279.4mm × 381mm 11 × 14 279.4mm × 355.6mm Legal 8-1/2 × 14 215.9mm × 355.
Konica7115_7118.book Page 10 Tuesday, October 16, 2001 10:51 AM Appendix 10 Inch Areas Original Size Paper Size Zoom Ratio Foolscap 8-1/2 × 14 215.9mm × 330.2mm Letter 84% 5-1/2 × 8-1/2 65% 11 × 17 130% 11 × 14 107% 5-1/2 × 8-1/2 64% 11 × 17 129% 11 × 14 127% 11 × 17 200% 11 × 14 164% Letter 8-1/2 × 11 215.9mm × 279.4mm Invoice 5-1/2 × 8-1/2 139.7mm × 215.9mm * Zoom Ratio = Paper Size ÷ Original Size 1 Inch = 25.4 mm 1 mm = 0.
Konica7115_7118.book Page 1 Tuesday, October 16, 2001 10:51 AM Index Numerics 2in1 ......................................................................................................6-1 4in1 ......................................................................................................6-1 A Account Number ................................................................................3-20 Adding Paper .......................................................................................
Konica7115_7118IX.fm Page 2 Tuesday, October 16, 2001 2:03 PM Index F Feeding Paper Manually ..................................................................... 5-5 Function Combination Table ............................................................. 10-6 G Grouping ............................................................................................. 6-8 I Icons on the Control Panel ................................................................ 3-14 Image Shift ...........................
Konica7115_7118.book Page 3 Tuesday, October 16, 2001 10:51 AM Index S Selecting the Paper .............................................................................5-3 Setting the Zoom Ratio ......................................................................5-12 Sorting .................................................................................................6-6 Special Paper Setting ..........................................................................7-9 Specifications ................
Konica7115_7118.
