User Guide

9 - 66
Section 9 : Applications
Overlay Memory (continued)
To Overlay Image Stored in HDD
The following procedure describes how to overlay the image stored in HDD onto each
page copied in the job.
Specifications for Overlay Copying in Overlay Memory
❒ APS and AMS are automatically released.
❒ Magnification is initially set to 1:1. This setting is changeable.
❒ Original/Copy size: A3, B4, F4, A4R, A4, B5
❒ Incompatible Basic Copying Conditions: Trimming
❒ Incompatible Special Originals: Resolution (Very high)
❒ Incompatible Applications: Reverse Image, STAMP, SET NUMBERING, WATERMARK,
WATERMARK NUMBERING in Stamp
Procedure
1
Set Copying Conditions
1 Close the RADF securely, then press [AUTO RESET].
2 Touch
APPLICATION on the Basic Screen to display the Application Selection Screen.
3 Touch
Stamp/Overlay. The Stamp/Overlay Selection Screen will be displayed.
4 Touch
OVERLAY MEMORY to display the Overlaying Image Selection Screen.
NOTE:
Without HDD, the OVERLAY MEMORY key will be dimmed on the Stamp/Overlay Selection
Screen to show inactivity.
Application Selection Screen Stamp/Overlay Selection Screen
Overlaying Image Selection Screen
5 Select the desired overlaying image data to highlight it. Use up/down arrow key to
scroll, if needed.
6 Touch
OK to return to the Stamp/Overlay Selection Screen.