User Guide

9 - 25
Section 9 : Applications
5
Platen Glass: Place/Scan Originals ... FACE DOWN
Scan the platen glass images.
NOTE:
Memory overflow may occur during scanning. See p. 14-4.
Image Insert (continued)
3
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [
C (CLEAR QTY.)] and enter the correct quantity.
4
RADF: Place/Scan Originals ... FACE UP
Scan the document feeder images.
1 Open the document feeder.
2 Position an original FACE DOWN on the platen glass,
then close the document feeder.
IMPORTANT: PLACE AND SCAN THE ORIGINALS
ACCORDING TO PAGINATION.
3 Press [START] to begin scanning.
4 Remove the original, and repeat for each original.
Be sure to press [
START] for each original.
1 Position originals FACE UP in the document
feeder.
2 Press [
START] to scan originals.
HINTS:
• For details on positioning originals, see p. 4-4.
• For original and copy paper information, see
Section 4.
INTERRUPT
PROOF COPY
TI
M
STOP
START
CLEAR QTY.
POWE
R
ON
/
9
Applications
Image Insert