4980-7785-01 User Manual Di1610p/Di1610fp TWAIN Driver
Contents 1 Welcome 1.1 Trademark Acknowledgements ...................................................1-1 2 Setting Up PC Scanning 3 Connecting to the USB Port 4 Installing the TWAIN Driver 4.1 5 6 7 Installing the TWAIN Driver Using Plug and Play ......................4-1 Installing the TWAIN Driver Using Plug and Play Under Windows XP ............................................................4-1 Installing the TWAIN Driver Using Plug and Play Under Windows 2000 ...............................
User Instructions For the U.S.A. FCC Part 15-Radio Frequency Devices NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
For countries subject to Class B regulations This device must be used with shielded interface cables. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules. For countries not subject to Class B regulations WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
iv Di1610p/Di1610fp
1 Welcome 1 Welcome This manual provides information on setting up and using a machine as a scanner. Read these instructions thoroughly before using the functions. For instructions on using the machine itself and for general safety precautions, refer to the manual provided with the machine. Store the quick guide and the enclosed CD-ROM in a safe location for future reference. ✎ Note No part of this manual may be copied or reproduced, either in part or in whole, without prior permission.
1 1-2 Welcome Di1610p/Di1610fp
Setting Up PC Scanning 2 2 Setting Up PC Scanning If the enclosed TWAIN Driver is installed on the computer, this machine can be used for to scan documents to a PC. The following software and hardware system environment is required for PC scanning. G OS: Windows 98 SE, Windows Me, Windows 2000, or Windows XP G TWAIN-compatible image-processing software (such as, Adobe Photoshop) G USB V.1.
2 2-2 Setting Up PC Scanning Di1610p/Di1610fp
3 Connecting to the USB Port 3 Connecting to the USB Port ✎ Important! Be sure to use a shielded USB cable. Use of an unshielded cable may result in radio interference. 1 Make sure that the machine and the computer to be connected to the machine are turned OFF. 2 Connect one end of the USB cable to the USB port of the machine. Connect PC Machine This completes the connection. ✎ Note USB1.1 is only supported on Windows 98 SE, Windows Me, Windows 2000, and Windows XP.
3 3-2 Connecting to the USB Port Di1610p/Di1610fp
4 Installing the TWAIN Driver 4 Installing the TWAIN Driver This section describes the procedure for installing the TWAIN driver. The printer driver can be installed by using Plug and Play. 4.1 Installing the TWAIN Driver Using Plug and Play Installing the TWAIN Driver Using Plug and Play Under Windows XP 1 With Windows running, insert the CD-ROM into your computer’s CDROM drive. 2 Turn on the machine. 3 When the machine is ready, connect it to the computer with the USB cable.
4 Installing the TWAIN Driver 7 Click [Next]. 8 The “Completing the Found New Hardware Wizard” dialog box appears. Click [Finish]. 9 The “Found New Hardware Wizard” dialog box appears again. Repeat steps 4 through 7. ✎ Note This completes the installation of the TWAIN driver.
4 Installing the TWAIN Driver Installing the TWAIN Driver Using Plug and Play Under Windows 2000 1 With Windows running, insert the CD-ROM into your computer’s CDROM drive. 2 Turn on the machine. 3 When the machine is ready, connect it to the computer with the USB cable. The “Found New Hardware Wizard” dialog box appears. Click [Next]. 4 Select Search for a suitable driver for my device (recommended) in the “Install Hardware Device Drivers” dialog box, and then click [Next].
4 Installing the TWAIN Driver Installing the TWAIN Driver Using Plug and Play Under Windows Me/ 98 SE 1 With Windows running, insert the CD-ROM into your computer’s CDROM drive. 2 Turn on the machine. 3 When the machine is ready, connect it to the computer with the USB cable. The “Add New Hardware Wizard” dialog box appears. 4 Click [Next], and then select Search for the best driver for your device (Recommended) on the next dialog box. Click [Next] again.
How to Scan Document 5 How to Scan Document 5.1 Using the Auto Document Feeder 5 ✎ Note The Auto Document Feeder (ADF) cannot be used when True Color or Gray (600 × 600 dpi) is selected for Scan Type. 1 Select the PC software program (Imaging, Photoshop, etc.). This procedure uses Microsoft Imaging as an example. 2 Click [File]. 3 Click [Select Device...]. 4 Choose “KONICA MINOLTA Di1610 PCL” from the dialog box, then click [OK]. 5 Click [Acquire Image...], then adjust any settings necessary.
5 5.2 How to Scan Document Using the Original Glass 1 Select the PC software program (Imaging, Photoshop, etc.). This procedure uses Microsoft Imaging as an example. 2 Click [File]. 3 Click [Select Device]. 4 Choose “KONICA MINOLTA Di1610 PCL” from the dialog box, then click [OK]. 5 Click [Acquire Image...], then adjust any settings necessary. ❍ See “Common Settings” on page 6-1. 6 Place the document face down on the Original Glass.
6 Common Settings 6 Common Settings 6.1 Auto Options 1 2 3 4 5 8 9 10 6 7 No. Items Settings 1 Original Size A4, B5, A5, FLS, Legal, Letter, Half Letter, 16K, Custom See “Original Size:” on page 6-2. 2 Scan Type B/W (default setting), Photo, Gray, True Color See “Scan Type:” on page 6-2. * True color mode is only available for scanning through Original Glass. 3 Resolution 150dpi × 150dpi, 300dpi × 300dpi (default setting), 600dpi × 600dpi See “Resolution:” on page 6-2.
6 Common Settings Original Size: Select the Original Size from the pull-down list to match the size of document to be scanned. Scan Type: The Scan Type pull-down list contain four options. G B/W: Suitable for most text documents. G Photo: Suitable for photographs. G Gray: Suitable for scanning black & white photographs and text documents. G True Color: Suitable for very detailed color images. Resolution: The Resolution pull-down list contain three options that can be used for different purposes.
6 Common Settings 6.2 Manual Options To enter the enhanced settings, select Manual in the Scanning mode. 1 2 3 4 5 6 7 8 No. Items Settings 1 Rotation None (default setting), Right 90, Left 90 2 Default Click [Default] to restore all the enhanced settings to their default values. 3 Brightness/Contrast -100 to 100% 4 Sharp -2 to 3 See “Sharp:” on page 6-4. 5 Curve Value input from -100 to 100 See “Curves:” on page 6-4. 6 Level Input Levels: Minimum: 0 to 247 Gamma: 0.10 to 9.
6 Common Settings Sharp: This function is used to sharpen the image or blur it for effect. Curves: This function is used to set the gamma of the image. This function will allow you to brighten or darken the overview of the image without changing the original resolution. There are three input controls available.
7 Error Message 7 Error Message 7.1 Original Document Jam Message on the Control Panel: Cause Remedy • A paper misfeed occurred in the Auto Document Feeder. • All misfed paper was not removed from the Auto Document Feeder. • Open the Document Feeder Cover and the Auto Document Feeder, and then remove the misfed paper.
7 Error Message To clear a misfeed in the Auto Document Feeder 1 Remove the original document from the Document Feed Tray. 2 Open the Document Feeder Cover and gently remove the misfed paper. 3 Open the Auto Document Feeder and gently remove the misfed paper. 4 Close the Document Feeder Cover, then load the document removed in step 1 into the Auto Document Feeder again.
7 Error Message Memory Full Message on the Control Panel: Cause Remedy • There is not enough memory. • Press any key from Control Panel of the machine. Communication Error Message on the PC screen: Cause Remedy • PC or machine system crash during communication. • USB cable does not connect properly during communication. 1. Turn the machine OFF, then check if the USB cable is connected properly or not. 2. After checking the USB cable carefully, turn the machine ON again. 3.
7 Error Message Scanner Busy Message on the PC screen: Cause Remedy • If TWAIN scanning and copy jobs are being performed at the same the time, the machine may stop in the middle of scanning. • Wait until Copy or all scanning is over. Read Data Error Message on the PC screen: 7-4 Cause Remedy • An error occurred while reading data from the machine while scanning. 1. Turn the machine OFF, then check if the USB cable is connected properly or not. 2.
Copyright 2004 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. 2004. 8 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
