User Guide

3
Administrator Mode
3-42 PageScope Light
3.5 Network Tab
The network settings for the printer controller can be specified from the
[Network] tab.
3.5.1 Common Setting
If [Common Setting] in the menu on the [Scan] tab is clicked, a sub-menu
appears, allowing you to select different pages containing various network
settings that are to be specified.
TCP/IP
This page appears after clicking [TCP/IP] in the sub-menu that appeared
after clicking [Common Setting] in the menu. The TCP/IP settings can be
specified from this page.
DHCP
Configuration*:
Specify whether or not the DHCP (Dynamic Host
Configuration Protocol) function is used.
IP Address*: Type in the IP address of this unit.
*Type in the IP address only if “DHCP Settings”
is set to [Disable].