User Guide

Administrator Mode
3
PageScope Light 3-25
3.4.2 Initial Setting
<Available only with the Di3510f, Di3010f, Di2510f or Di2010f>
This page appears after clicking [Initial Setting] in the menu on the [Scan]
tab. The default fax settings can be specified from this page.
Self-ID: Type in the unit’s ID.
(12 alphanumeric characters or less)
Self-telephone # Information 1
• Self-telephone #: Type in the unit’s telephone number.
Up to 20 characters including 0 through 9 and +
• Line Type: Select the type of telephone line that is being used.
• PSTN/Ext Line
Switch:
Select whether an internal or an external line is
being used.
Self-telephone # Information 2 <Available only if the multi port is
installed>
• Self-telephone #: Type in the unit’s telephone number.
Up to 20 characters including 0 through 9 and +
• Line Type: Select the type of telephone line that is being used.
• PSTN/Ext Line
Switch:
Select whether an internal or an external line is
being used.
[Apply] button: Click this button to change the settings to the
new ones that were specified or selected.
[Clear] button: Click this button to clear the new settings that
were specified or selected.