User Guide

Introduction

PageScope Light 1-3

1.3 Accessing PageScope Light

✎

Note

In order to use PageScope Light, the IP address must be set in

advance.

PageScope Light can be accessed through a Web browser.

1 Start up the Web browser.

2 In the Address bar, type the IP address of the controller in the format

shown below, and then press the computer keyboard's [Enter] key.

http://controller_IP_address/

(Example) If the controller IP address is 192.168.0.10:

http://192.168.0.10/

3 The initial page of PageScope Light appears.

✎

Note

If your Web browser is set to use a proxy server, it may not be able to

access PageScope Light. In this case, specify the IP address of the

printer/scanner controller as an exception for access through the

proxy server.

(Example) With Internet Explorer 6

1 Click [Tools] in the menu bar, and then click [Internet Options....].

2 Click the [Connections] tab.

3 Click the [LAN Settings] button.

4 Click the [Advanced] button in the “Proxy server” group box.

5 Type the IP address of the printer/scanner controller into the

“Exceptions” list box.

1.3.1 Using PageScope Light

PageScope Light is used in the same way that Internet Web pages are

viewed. Click Web page links to display those pages, or click the [Back]

(or [Forward]) button to display the previous (or next) page.