User Guide

Administrator Mode
3
PageScope Light 3-5
Default Copy Output Levels
• Auto: Select the default density level when “Density
Priority” is set to “Auto”.
• Manual: Select the default density level when “Density
Priority” is set to “Manual”.
Print Exposure: <Only available with Di3510/Di3010/Di3510f/
Di3010f>
Specify the default density level for printing.
Output Priority
• Output
Mode(Sort):
Select the default sorting setting.
• Output Mode
(Staple):
<Only when a built in finisher is installed>
Select the default stapling setting.
• Output Mode
(Punch):
<Only when a built in finisher and punch kit are
installed>
Select the default hole-punching setting.
[Apply] button: Click this button to change the settings to the
new ones that were selected.
[Clear] button: Click this button to clear the new settings that
were selected.