User Guide

User Mode
2
PageScope Light 2-41
Mail Number: Specify the mail box number used with mail box
transmission for the registered fax program.
(3-digit number)
✎
Note
“Real-Time”, “Password TX”, “Remote Copy” and “Conf. TX” are
available only with normal fax transmissions using a common
telephone line.
Menu 2
• Subject
Selection:
Specify the subject for the registered fax
program.
For details on specifying how the subject is
registered, refer to page 3-55.
• Set Reply E-mail
Address:
<Available only if the internet fax & network scan
kit or network scan kit is installed>
Click the [Set Reply E-mail Address] button, and
then, from the registered one-touch keys, select
the e-mail address that replies are sent to (only 1
location). However, the only recipients that can
be selected are those where the transmission
mode of the one-touch key was set to “TX: PC(E-
mail)” or “TX: InternetFAX(E-mail)”.
• Set File Name: <Available only if the internet fax & network scan
kit or network scna kit is installed>
Specify the file name for the registered fax
program.
(16 alphanumeric characters or less)
• [Apply] button: Click this button to register the fax program with
the specified or selected settings.
• [Cancel] button: Click this button to cancel the registration of the
fax program.
• [Clear] button: Click this button to clear the new settings that
were specified or selected.