User Guide

User Mode
2
PageScope Light 2-17
2.4 Print Tab
<Available only if the printer controller (Pi3505e) or printer controller
(Pi3505e/PS) is installed>
The printer controller settings can be specified from the [Print] tab.
2.4.1 Default Settings
If [Default Setting] in the menu on the [Print] tab is clicked, a sub-menu
appears, allowing you to select the type of printer settings that are to be
specified.
General settings (Settings)
This page appears after clicking [Settings] in the sub-menu that appeared
after clicking [Default Setting] in the menu. The general default settings
can be specified from this page.
PDL Configuration: Select the PDL.
Paper Size: Specify the paper size that will be used if the
controller receives a print job where the paper
size is not specified.
Paper Source: Specify the paper source that will be used if the
controller receives a print job where the paper
source is not specified.