User Guide

Administrator Mode
3
PageScope Light 3-57
3.5.3 FTP Server
<Available only if the internet fax & network scan kit or the network scan
kit is instralled>
If [FTP Server] in the menu on the [Network] tab is clicked, a sub-menu
appears, allowing you to select different pages containing various FTP
server settings that are to be specified.
FTP Configuration
This page appears after clicking [FTP Configuration] in the sub-menu that
appeared after clicking [FTP Server] in the menu. Settings for the FTP
proxy server and the FTP server can be specified from this page.
Proxy IP Address: Select the format for specifying the proxy server
address.
• IP Address: Type in the IP address of the proxy server.
• Host Name: Type in the host name for the proxy server.
(64 alphanumeric characters or less)
*This parameter appears if “DNS Settings” is set
to “Yes” on the page that appears after clicking
“TCP/IP” in the sub-menu that appeared after
clicking “Common Setting” in the menu on the
[Network] tab after logging into the Administrator
mode.
Port Number: Type in the port number of the proxy server.
FTP Connection
Timeout:
Specify the amount of time until the connection
with the FTP server times out.