User Guide

3
Administrator Mode
3-54 PageScope Light
SMTP
This page appears after clicking [SMTP] in the sub-menu that appeared
after clicking [Mail/Internet FAX] in the menu. Settings concerning e-mail
transmission can be specified from this page.
SMTP Server
Address:
Select the format for specifying the SMTP server
address.
• IP Address: Type in the IP address of the SMTP server.
• Host Name: Type in the host name for the SMTP server.
(64 alphanumeric characters or less)
*This parameter appears if “DNS Settings” is set
to “Yes” on the page that appears after clicking
“TCP/IP” in the sub-menu that appeared after
clicking “Common Setting” in the menu on the
[Network] tab after logging into the Administrator
mode.
Port Number*: Type in the port number of the SMTP server.
SMTP TX Timeout*: Specify the amount of time until transmissions to
the SMTP server time out.
SMTP RX
Timeout*:
Specify the amount of time until receptions from
the SMTP server time out.
[Apply] button: Click this button to change the settings to the
new ones that were specified or selected.