User Guide

Administrator Mode
3
PageScope Light 3-51
Search Root: Specify the search base (root).
(255 alphanumeric characters or less)
(Example) dc=sales, dc=ABCDEFG, dc=com
For details on the search root that should be
entered, consult with the LDAP server
administrator.
Search Timeout: Specify the amount of time until search time out.
Max. hit of number: Specify the maximum number of hits when
searching.
Authentication
Method:
Specify the LDAP authentication method.
Login Name: Type in the login name for the LDAP server. (255
alphanumeric characters or less) This parameter
is available only if an authentication method
other than “Anonymous” is selected.
Password: Type in the password for the LDAP server. (128
alphanumeric characters or less) This parameter
is available only if an authentication method
other than “Anonymous” is selected.
[Connection
Check] button:
Click this button to check whether or not a correct
connection has been established with the LDAP
server.
[Apply] button: Click this button to change the settings to the
new ones that were specified or selected.
[Clear] button: Click this button to clear the new settings that
were specified or selected.