User Guide

3
Administrator Mode
3-50 PageScope Light
LDAP
<Available only if the internet fax & network scan kit or the network scan
kit is installed>
This page appears after clicking [LDAP] in the sub-menu that appeared
after clicking [Common Setting] in the menu. The LDAP search settings
can be specified from this page.
LDAP search
function:
Select whether to enable or disable the LDAP
search function.
LDAP server
address:
Select the format for specifying the LDAP server.
• IP Address: Type in the IP address of the LDAP server.
• Host Name: Type in the host name for the LDAP server.
(255 alphanumeric characters or less)
*This parameter appears if “DNS Settings” is set
to “Yes” on the page that appears after clicking
“TCP/IP” in the sub-menu that appeared after
clicking “Common Setting” in the menu on the
[Network] tab after logging into the Administrator
mode.
Port: Type in the number of the port that is used to
access the LDAP server.