User Guide

3
Administrator Mode
3-48 PageScope Light
Windows
<Available only if the printer controller is installed>
This page appears after clicking [Windows] in the sub-menu that
appeared after clicking [Common Setting] in the menu. The Windows
printing service settings can be specified from this page.
✎
Note
After changing the settings for parameters marked with an asterisk (*),
turn the copier off, then on again.
Enable Windows
Printing Service*:
Specify whether or not the Windows printing
service is used.
NetBIOS Name: Type in the NetBIOS name.
(15 alphanumeric characters or less)
Printing Service
Name*:
Specify the name of the printing service.
(13 alphanumeric characters or less)
WorkGroup
Name*:
Specify the name of the workgroup.
(15 alphanumeric characters or less)
[Apply] button: Click this button to change the settings to the
new ones that were specified or selected.
[Clear] button: Click this button to clear the new settings that
were specified or selected.