User Guide

Page 6
Accessing the CD-ROM drive
When accessing the CD-ROM drive in Fiery Z4 Downloader, scroll to the Fiery icon and
select CD1 to access files to download.
Connecting to the Fiery Z4
You can only connect to one Fiery Z4 at a time.
Status
The print report status displayed in Fiery Link may not match the status displayed on the
Fiery Z4.
Edit My Fiery List
When you have the Edit My Fiery List window open and you click the Advanced button or
the Refresh button, the Edit My Fiery List window may hide new dialog boxes. To prevent
this, move the Edit My Fiery List window off to one side before you click either the
Advanced button or the Refresh button.
File Info
In Fiery Link on Mac OS, if you use the File Info tool after you print a job to the Fiery Z4,
the time is incorrect.
Fiery Z4 processor information
The Fiery Z4 is equipped with a Pentium III processor (or dual processors if the Fiery Z4
has the upgrade) running at 500MHz. This information is not displayed when you select
the Fiery Z4 Info icon.
Alert Floater pop-up option
The Alert floater pop-up option in the Preferences menu is not supported.
Scanning while a print job is processing
It is not recommended that you begin scanning a job while a job is in process. Wait until
the current job has finished printing before using Fiery Scan.
TextBridge Pro 9.0/Pagis 3.0
Fiery Scan does not support TextBridge Pro 9.0 or Pagis 3.0.
Canceling a scan
If two or more pages are loaded in the ADF (Auto Document Feeder), you cannot cancel
any processing prescan or scan job. If you want to cancel ADF scanning altogether, first
remove any pages remaining in the ADF, then click Prescan to eject pages located on the
copier glass and in the ADF takeup roller. Alternatively, you can wait for approximately two
minutes after the current page is scanned and ejected; the remaining pages are automatically
ejected from the ADF.
Installing the dongle
When installing the dongle on a user computer to enable DocBuilder Pro, make sure the
dongle is connected directly to the parallel port. If dongles for other software are present,
the DocBuilder Pro dongle must be first; that is, closest to the parallel port connector on
the Fiery Z4.
Fiery Downloader
Fiery Spooler
Fiery Link
Fiery ScanFiery Scan
DocBuilder Pro