User Guide

Page 5
Duplex
On Windows 2000 and the Mac OS, the duplex option prints in reverse. Select Top-
Bottom if you want the output to print as Top-Top and vice versa. This applies to 2-up and
6-up prints only.
180 Degree Rotation and Landscape
To use 180 degree rotation and landscape options on the Mac OS, you must download the
latest Mac PPD from the server. The PPD available on the User Software CD does not
support these two options. The latest Windows PPD is not available on the server.
Overriding simplex setting
When a simplex A5 or 5.5" x 8.5" size job is sent to the Fiery Z4 with Compression set to
Off, and the simplex setting is overridden with Duplex, an error occurs.
Override settings
Selecting Command WorkStation override settings may cause a print job to process
incorrectly. If you override a specific setting for an option from the Command WorkStation
and then open the job settings again to replace that setting with Printer’s Default, you may
get unexpected printing results. To avoid this, do not choose Printer’s Default when you
override print settings from the Command WorkStation, or remove the original raster file
before you override print settings again.
Downloading PDF files
Downloading PDF files to the Direct connection is not supported. Instead, use either the
Print queue or the Hold queue.
When you download a large PDF file, the RIP bar shows the amount of the file processed as
“0 KB.” Despite this, the file RIPs and prints correctly.
Cancel Printing
If you choose Cancel Printing from the Server menu and you restart the Fiery Z4 before the
cancel function has been completed, you will lose the connection to the Fiery Z4 and
unknown errors may be displayed.
FreeForm printing
To print variable data as duplex Top-Bottom, the FreeForm master must be at least two
pages.
Page Range
Command WorkStation does not display Page Range information.
Scale setting
Command WorkStation does not display the Scale setting information.
Device Name
You must enter the device name (08C-M) to configure the connection to Fiery utilities.
This is required for Fiery utilities to function properly.
Command
WorkStation
Fiery utilities