User Guide

Page 3
Maximum number of users for SMB
Windows NT 4.0 supports a total of 10 simultaneous SMB connections, including the
Direct, Print, and Hold queues.
AppleTalk support
The AppleTalk protocol is not supported for Token Ring networks.
Fiery Z4 domain configuration
In order to add the Fiery Z4 to a domain in configurations that do not include the Fiery Z4
Advanced Controller option, you need to add the Fiery Z4 from another Windows NT 4.0
server on the network using the Server Manager utility.
Installing System Software with the Token Ring option
If the Fiery Z4 has the Token Ring option, remove the Token Ring board before installing
System Software. After installing System Software, replace the Token Ring board. For more
information, refer to the documentation that accompanied the Token Ring option kit.
Startup error—driver failed
If you do not have a Token Ring board installed, you may see the following message on the
monitor when you restart the system: “At least one service or driver failed during system
startup. Use Event Viewer to examine the event log for details.” Ignore the message and
click OK to close the window.
Installing software
Software for Fiery utilities can be installed on the Fiery Z4. Do not install any other
applications on the Fiery Z4. Other applications are not supported and can cause system
problems.
Automatic PPD selection
When setting up the Direct, Print, or Hold queue on Mac OS for the first time, if you click
the Create button, the correct PPD is not automatically found; a Select a PostScript Printer
Description dialog box appears instead, prompting you to locate the
Fiery Z4 PPD.
Disk full error message
When the hard disk drive on the Fiery Z4 is full, any print jobs sent to the Fiery Z4 will not
print until the current job is finished. You can remove completed jobs from the printed
queue to free up more disk space.
Opening the LCT door while a job is printing
If the LCT door is opened while a job is printing, the job will be RIPped but will not print.
To resume printing, reboot the server, and power the copier off and then on.
Load paper error message
If a 5.5"
x 8.5" job is sent to the Fiery Z4 and the specified tray is empty, the load paper
error message appears. In this case, the job cannot be canceled.
Postcard Paper
On Windows computers, the left-hand border is truncated from N-up jobs printed on
postcard paper.
Installing software
on the Fiery Z4
Installing the
Adobe PS printer
driver on Mac OS
Printing