User Guide

Page 2
Renaming the server
If you rename the server, the name must be fewer than 10 characters.
Remote Setup for Bindery and NDS (Novell Directory Services)
When configuring Bindery or NDS in Network Setup using WebSetup or the Command
WorkStation from a client computer, enter a password in order to make changes. For
Bindery Setup, log in as Admin, Supervisor, or Guest with the appropriate password. For
NDS, select the appropriate login and password.
TCP/IP and DHCP servers
In some cases, Mac OS computers may crash when attempting to obtain an IP address from
a DHCP server while loading the TCP/IP driver. Check the TCP/IP Control Panel to make
sure that you have a valid IP address and that the router and DNS server addresses are valid
before running applications such as ColorWise Pro Tools.
Fiery Setup
To run Fiery Setup from the Control Panel, you must log in with Administrator privileges.
Fiery Server Setup
If a connection to the Fiery Z4 Color Server fails after changing settings in the General or
Printer Setup tab of the Fiery Server Setup dialog box, the WorkGroup name and the
Domain name may be the same. To resolve this problem, use different names.
Windows Setup (WINS Printing) from the Fiery Z4 Control Panel
Depending on your selections for setting a domain for WINS printing, the Fiery Z4
prompts you that it will reboot. Choose OK when prompted. This allows the Fiery Z4 to
retrieve a current list of domains. Allow the Fiery Z4 to reboot and return to Setup to finish
making the settings.
Fiery Z4 passwords
The Fiery Z4 password used to access Setup, as well as the password required to log in to
the Fiery Z4, are case-sensitive and must be entered exactly.
UNIX printing
There may be incompatibility problems with some UNIX environments.
Restore Backup
Fiery Z4 system software resides on the hard disk drive and is backed up the first time you
power on the Fiery Z4. If necessary, you can retrieve a backup of the system software using
the Restore Backup command. Press the first line selection button on the Control Panel
during diagnostics to display the Restore Backup menu and select Restore Backup.
Selecting Restore Backup restores the system software to the factory default configuration.
Editing device settings
To change print defaults in a driver that was downloaded from the Fiery Z4 using WINS
printing (SMB), the permissions for the Print queue on the Fiery Z4 server must be set to
Full Control for the user “Everyone.” Once you are logged in with Administrator privileges,
you can allow a user or all users to change print defaults in the driver by enabling Full
Control in the Properties/Security/Permission tab.
Setup
System