User Guide

7.1 Capturing Documents
7-3
Capturing Documents Chapter 7
7.1.3 Scanning with a TWAIN Device
PageScope Router will use the software provided with your TWAIN scanner to perform the
scan operation. You must first select a Repository Folder in which to store the scanned image.
To Scan with a TWAIN Device
1. Insure that the scanner is connecting properly. See 7.1.2 – Connecting a TWAIN Device .
2. Open the Document Manager.
3. Select a Repository. Refer to section
5.1.3 – Repository Selection .
4. Use the mouse and select the destination folder where the image will be stored.
5. Click the button. The following dialog will be displayed.
6. You must assign a name and specify a file format for the image that will be scanned and
saved. Enter this information about the file in the specified fields.
•
Name:
field Enter the desired name of the new image file into this
field.
•
Description:
field Enter an optional description for the file in this field.
•
Type:
list This drop-down list contains the file formats in which
the image may be saved. Select the desired format.
•
More >>
button Click this button to display the following additional
format configuration fields on the dialog. The available
selections are TIF, JPG, or PDF.