User Guide

7.1 Capturing Documents
7-2
Capturing Documents Chapter 7
7.1 Capturing Documents
7.1.1 Capturing Overview
There are several ways in which documents may enter Repository Areas in a PageScope
Router system. They include:
• FTP - (Document Route only)
• Email - (Document Route only)
• Twain scanner attached to the client PC
• Copy a file from the user’s PC directly into an existing Repository Area.
The system also tracks the following information about each file entered into a Repository
Area:
1. Color Management Completed (yes or no.)
2. Destination Color Space (sRGB, EFI RGB, or Apple RGB)
When the file first enters PageScope Router, Color Management Completed is always “no,”
and the Destination Color Space is always blank. The values are updated after Color
Management is performed. Color Management may only be performed on a file once.
7.1.2 Connecting a TWAIN Device
The PageScope Router system is capable of receiving images from a TWAIN device (scanner,
digital camera, etc.) directly connected to the PageScope Router Client PC.
To use this ability, you must connect your TWAIN device correctly, and an appropriate device
driver corresponding to the TWAIN device must be installed on your computer.
Refer to the instructions provided with your TWAIN device for information about device
drivers and installation.
Once the TWAIN is correctly connected and installed, you may Scan with the TWAIN Device.