User Guide

6.1 Working with Documents
6-13
Working with Documents Chapter 6
•
Apple RGB:
The standard color space for the Macintosh
•
EFIRGB:
The standard color space for the Fiery Controller used with
MFP devices
Printing the Scanned Image
When you print the scanned image, you must insure that the RGB source profile in the printer
driver is the same as the color space in PageScope Router. If your printer doesn’t have the
RGB profile setting or you don’t know which color space should be chosen, please choose
sRGB color space in PageScope Router.
Settings for color matching
When you perform color matching, please choose the proper ICC profile according to your
MFP model. ICC profile is the color characteristic data of the scanner of MFP.
If you use older models, you may need to choose the proper setting of “the background
remove” and/or “the acquisition course”.
6.1.4.1 Color Matching a Document
There are two ways to send documents to Color Management: from the Repository Document
List in the Document Manager, or from the Image Editing toolkit.
To Color Match a Document from the Document Manager
1. Open the Document Manager.
2. Refer to section
5.1.2 – Repository Viewer and select the Repository document(s) that you
want to process. You may select multiple documents.
3. Click the button on the left side of the Document Manager window.
4. The Color Management dialog will be displayed.
5. Proceed to Color Management Dialog below.
To Color Match a Document from the Document Viewer
1. Open the Document Manager.
2. Refer to
5.1.2 – Repository Viewer , select, and open the Repository document that you
want to process.
3. Click the button to enable the image editor functions. The buttons will
become visible on the user interface.
4. Click the button. The Color Management dialog will be displayed.
5. Proceed to Color Management Dialog below.