User Guide

6.1 Working with Documents
6-12
Working with Documents Chapter 6
•
Clockwise Angle (degrees)
section
This section is used to specify the angle of rotation.
You may enter the clockwise angle in the field pro-
vided, use the arrow controls to change the value in +/-
90 degree increments, or use the slider control to spec-
ify the value.
•
Background Color
radio buttons
These buttons are used to set the background color of the
new image space that is created outside of the rotated
original image. The available colors are White or Black.
•
Select Background Color
button
This button is used to set the background color of the
new image space that is created outside of the rotated
original image. This button opens Color Setting dialog
to select desired color.
•
Resize
checkbox If this button is checked, rotated image will be adjusted
to fit the size of original image.
•
Document Options
checkbox
If the image is a page from a multipage document, you
may select
Apply
to all pages in the document to apply
the operation to all pages.
5. Click
OK
to proceed and Deskew the image or
Cancel
to stop the operation.
6.1.4 Color Management
The PageScope Router Client software allows the user to perform Color Matching on images.
This process matches the color space of the MFP device to the output devices and displays
used by the PageScope Router system.
The following notes provide useful information about Color Matching.
The purpose of color matching
When an image is scanned, the brightness and tone (color saturation/hue) of the resulting
scanned image may appear to be different from the original document. This may occur with
older MFP devices, for example CF2001/CF9001 “Scan to HDD”, in which color matching is
not performed. PageScope Router allows you to correct these images during Document Route
processing, or from a Repository folder location.
Color Space
The color space of the image can be changed according to your purpose.
•
sRGB:
The standard color space for the Windows PC or the internet