User Guide

6.1 Working with Documents
6-11
Working with Documents Chapter 6
6.1.3.7 Rotation
You may rotate images either in 90-degree increments, or in other whole degree
increments.You may specify the direction of rotation (either clockwise or counter-clockwise)
and return the viewed image to its original, non-rotated state.
To Rotate an image in 90-degree increments
1. Select the image that you want to modify.
2. Click the button to enable the image editor functions. The buttons will
become visible on the user interface.
3. Click the button to rotate the image counterclockwise in 90 degree increments.
4. Click the button to rotate the image clockwise in 90 degree increments.
To Rotate an image by degree
1. Select the image that you want to modify.
2. Click the button to enable the image editor functions. The buttons will
become visible on the user interface.
3. Click the button. The following dialog is displayed.
4. The Rotate dialog contains several controls:
•
Thumbnails
section This section displays 2 thumbnail images showing the
Original (Before) and Modified (After) versions of the
image. These allow you to see the effect of the applied
rotation before it is accepted.