User Guide

6.1 Working with Documents
6-6
Working with Documents Chapter 6
4. Select the correct radio button.
Note:
If the image is a page from a multipage document,
you may select Despeckle all pages to apply the operation to all pages.
5. Click
OK
to proceed and Despeckle the image or
Cancel
to stop the operation.
6.1.3.4 Deskew
The deskew operation corrects image skew that may be introduced by improper positioning of
the original on the scan device at scan time.
To Deskew an image
1. Select the image that you want to modify.
2. Click the button to enable the image editor functions. The buttons will
become visible on the user interface.
3. Click the button. The following dialog is displayed.
4. Select the correct radio buttons in the dialog.
•
Deskew Mode Options:
The operation can be configured to give the processing
priority to Speed or Quality. Choose Speed for large
documents or when processing time is critical, or
choose Quality for small documents or when process-
ing accuracy is most important.
•
Page Options:
If the image is a page from a multipage document, you
may select Deskew all pages to apply the operation to
all pages. Otherwise select Deskew this page only.
5. Click
OK
to proceed and Deskew the image or
Cancel
to stop the operation.