User Guide

3.1 Installation
3-3
Installation Chapter 3
3.1.3 Installing the PageScope Router Client Software
The PageScope Router Client software is installed on a client workstation after being
downloaded from the PageScope Router Server using an Internet Browser.
Note
Downloading the Client Installation File
1. At the Client workstation, start Internet Explorer.
2. Type the complete URL of the PageScope Router Server in the address field. For example,
enter: http://10.15.120.96/PSRServer or http://hostmachinename/PSRServer. Go to this
web page.
3. The
Minolta PageScope Router v1.0
web page should be displayed. Click one of the
following links:
• Download PageScope Router Client Application Install
• Download 508 Compliant PageScope Router Client Application Install
Note
4. When prompted, select
Save
to save the file on the server.
5. Select a directory location to save the PSRClient.exe (or PSRClient508.exe) file. After the
file is downloaded, click
OK
to close the dialog.
Installing the Client Software
1. Disable all anti-virus software.
2. Use Windows Explorer to locate the PSRClient.exe (or PSRClient508.exe) file saved in
the last step. Select and double-click the filename.
3. The PageScope Router Client installation will begin and a
Preparing to Install
dialog
will be displayed.
4. A
Welcome....
dialog will be displayed. Click
Next
to continue.
5. A
Choose Destination Location
dialog will be displayed. Enter a new directory for the
software by selecting Browse, or use the recommended default location. Click
Next
to
continue.
6. The installation will proceed and a
Setup Status
dialog will be displayed as the individ-
ual components are installed and configured. A percentage complete will be displayed.
Before you can download the software, you must obtain the URL of the PageScope Router Server
PC. Contact the system administrator for this information.
The 508 compliant version will install a user interface that is compliant with Section 508 of the Reha-
bilitation Act of 1973