User Guide

8.1 Document Routes
8-23
Document Routes Chapter 8
•
Remove
button This button is used to remove the selected Document
Route.
•
Rename
button This button is used to rename the selected Document
Route.
Dialog Functions
•
Save to UNC Path
checkbox When this is checked, the modified documents are
routed to the UNC path specified by the data in the fol-
lowing fields.
•
Test Connection
button This button is used to verify the network access and
security credentials for the connection that is specified
by the data field information to insure that PageScope
Router will be able to perform the routing.
•
Path:
field This field contains the UNC path to which the docu-
ments are routed.
•
Username:
field This field contains the Username of an account that has
read-and-write access to the UNC path specified. The
PageScope Router Server will use these credentials to
access the UNC path or the location used.
•
Set Password...
button Use this button to set the Password that PageScope
Router should use with the Username.
•
Windows Domain:
field This field contains the name of the Network Domain in
which the UNC Path is located.
Note
Dialog Controls
•
OK
button This button is used to accept the entered information
and close the dialog.
•
Cancel
button This button is used to cancel the operation.
•
Apply
button This button is used to accept the entered information.
If the destination location contains a file with the same name as the file being written, the PageScope
Router Server follows the Windows convention for multiple similar filenames in a directory (e.g. “file-
name.ext”, “filename (2).ext”, “filename (3).ext”)