User Guide

6.1 Feeding the Document
6
Di2510/Di3010/Di3510 6-3
Original Documents Chapter 6
2: Copying possible
—: Copying not possible
✎
Note
It may not be possible to make the desired copies depending on whether the “Mixed
Orig Detection” function is selected, whether the “Auto Size” setting or the “Auto
Paper” setting is selected, and depending on the orientation of the loaded paper.
Precautions Concerning the Documents
The following types of documents should not be loaded into the duplexing docu-
ment feeder, otherwise paper misfeeds or damage to the document may occur. In-
stead, these types of documents should be positioned on the original glass.
Documents on special paper
G Folded documents (folded in half or fanned)
G Highly translucent or transparent documents, such as diazo photosensitive paper
G Documents with binder holes
G Documents with many binder holes, such as loose-leaf paper
G Coated documents, such as heat-sensitive or carbon-backed paper
G Inkjet printer paper
G Documents that have just been printed with this copier
Documents on paper that cannot be fed
G Curled documents
G Wrinkled or torn documents
G Overhead transparencies
If non-standard-sized paper is determined to be close to a standard size, copying
with the “Auto Paper” or “Auto Size” settings is possible.
257 mm B4 L 2222—————
B5 C 2222—————
210 mm A4 L 222222———
A5 C ——2222———
182 mm B5 L ——22222——
148 mm A5 L ——————22—
123 mm B6 L ———————22
Maximum Document Width 297 mm 257 mm 210 mm 182
mm
148
mm
123
mm
Mixed Width Document Detection A3 L A4 C B4 L B5 C A4 L A5 C B5 L A5 L B6 L