User Guide

7.3 Selecting the Orig. > Copy Settings
7
Di2510/Di3010/Di3510 7-29
Specifying Copy Settings Chapter 7
8 Touch and to specify
the width of the erased area.
✎
Tip
The erased area can be set
between 5 mm and 20 mm, in
1 mm increments.
As a default, the width of the
area erased along the binding
is 12 mm. To change this de-
fault setting, consult your ser-
vice representative.
9 Touch [Enter].
10 Select the desired copy settings.
✎
Note
If you touch [Book], you can
not select [Single-2in1] or [4in1
/ Booklet].
11 Press the [Start] key.
The copies are printed.