User's Manual
Table Of Contents
- About Trademark
- Important Safety Instructions
- Chapter 1 Overview
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Removing the Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing and Removing the Paper rack
- 2.6 Installing the Ribbon Cartridge
- 2.7 Connecting the Printer to Your Computer
- 2.8 Connecting to the Power Cord
- 2.9 Installing Driver
- 2.10 Ethernet Settings
- Chapter 3 Loading Paper
- Chapter 4 Control Panel
- Appendix A Printer Maintenance
- Appendix B Specification
Documax 5380 User’s Manual
- 42 -
Appendix B Specification
B.1 General Specification
Item Description
Type 24-Pin Flatbed Dot Matrix Impact Printer
Print direction Bidirectional logical seeking
Printing width 80 columns (10 CPI)/203.2 mm
ASCII
speed 10 CPI 12 CPI
Normal speed 142 CPS 170 CPS
High speed 275 CPS 330 CPS
Print speed
Super high speed 300 CPS 360 CPS
Print head
Diameter of wire: 0.22 mm
Resolution 360 x 360 dpi (Max.)
Character set
ASCII: 17 international character sets (U.S.A, FRANCE, GERMANY, U.K, DENMARK1, SWEDEN,
ITALY, SPAIN1, JAPAN, NORWAY, DENMARK2, SPAIN2, LATIN AM, KOREA, LEGAL,
NETHER, TURKEY)
Code Page
U.S.A, MULTI, PORTUGAL, CANADA, NORWAY, EAST EURO, CYRILLIC, RUSSIAN, HUNGARY,
KAMENICKY, TURKEY, ICELAND, BULGARIA, MAZOVIA, GRK 437, GRK 851, GRK8859-7, GRK
1253, ARAB NLS, ARAB EXT, WIN LAT1, WIN LAT2, ISL LTN1, ISO LTN2, TUR8859-9, ISO LTN9,
KBL, LATIN 7
Fonts
ASCII: Draft, Roman, Sans Serif, Courier, Prestige, Script, OCR-A, OCR-B, Orator
Note: In high speed mode or super high mode, printer would automatically change the ASCII
font to Draft when printing ASCII characters.
Bar code
EAN-13, EAN-8, Interleaved 2 of 5, Matrix 2 of 5, Industrial 2 of 5, Code 39, Code 128 B, Code 128
C, NW-7
Character pitch
ASCII: 10 CPI, 12 CPI, 15 CPI, proportional
Line space 1/6 inch, 1/8 inch, programmable in 1/360 inch increments
Paper feeding speed Max. 101.6mm/sec
Cut sheet: 4.23 ±0.5 mm
Paper feed one line
Tractor paper: 4.23 ±0.8 mm
Paper feed precision
Paper feed accumulative error: less than 2.1mm
Paper type Cut sheet, tractor paper, envelope, adhesive sticker
Emulation ESC/PK2, OKI 5530SC
Interface
Parallel interface: Centronics (IEEE1284 NIBBLE)
Ethernet interface: 10/100Base-T
USB interface: 2.0 Full-Speed
Serial interface: RS-232C
Note: Only one parallel interface or Ethernet interface is supplied, you can choose either
according to your requirement. (According to specific interface standards)
Input Buffer 132 KB
Model: JMR125
Ribbon
Life: 8 million characters (draft mode)
Noise ＜52 dB (A) (ISO7779 standard)
Control Panel 3 keys and 3 indicator lights
Cut sheet: Load/eject from front, Load from front and eject from rear
Paper feed type
Tractor paper: Load from eject and eject from front