User's Manual

Documax 5380 User’s Manual
- 32 -
PIN 11
BROKEN
PIN 12 BROKEN
PIN 13 BROKEN
PIN 14 BROKEN
PIN 15 BROKEN
PIN 16 BROKEN
PIN 17 BROKEN
PIN 18 BROKEN
PIN 19 BROKEN
PIN 20 BROKEN
PIN 21 BROKEN
PIN 22 BROKEN
PIN 23 BROKEN
PIN 24 BROKEN
Caution: 1. The items printed in shadow are the current settings.
2. If the printer doesn’t install Ethernet, the relative Ethernet information, such as MAC, IP
and so on, will not be printed out in self-testing and menu setup mode.
 Entering the Menu Setup Mode
1. Make sure the printer is online.
2. Keep pressing the LOAD/EJECT key and ONLINE key for 3 seconds.
The POWER LED and ONLINE LED blink twice simultaneously, which indicates the printer enters
into menu setup mode.
It prints out the title and the first menu firstly (as Figure 4-3 shown). The underlined items are the
default settings. The print head will stop at the default setting.
3. Using the following keys to modify the Bill type and speed setting:
LOAD/EJECT Select the menu option or menu setting value.
LF/FF Enter into submenu or confirm menu setting value.
Note: Newly setting option will be shown in FILLED
ONLINE Return to upper menu (Hold on pressing ONLINE key will return to main menu
directly and save the setting)
4. Give up the settings just modified, just turn off the printer directly. If you need to save the newly
Fi
g
ure 4-2 Current settin
g
report
Documax 5380 SETUP MENU SYSTEM
Use the LOAD/EJECT key to point the print head to the desired setting.
Use the LF/FF key to confirm the current setting.
Use the ONLINE key to go back the previous menu.
Press and hold the ONLINE key to save settings and exit.
Current settings are
New settings will be FILLED.
MAC: XX-XX-XX-XX-XX-XX DHCP: YES IP: 10.0.0.1 Subnet: 255. 255. 255.0 gateway: 255.255.255.255
SYSTEM SETUP CHARACTER PAGE LAYOUT PRINT SETUP SERIAL I/F
BREAK PIN
Fi
g
ure 4-3 Menu Setu
p
Mode