User's Manual
Table Of Contents
- About Trademark
- Important Safety Instructions
- Chapter 1 Overview
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Removing the Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing and Removing the Paper rack
- 2.6 Installing the Ribbon Cartridge
- 2.7 Connecting the Printer to Your Computer
- 2.8 Connecting to the Power Cord
- 2.9 Installing Driver
- 2.10 Ethernet Settings
- Chapter 3 Loading Paper
- Chapter 4 Control Panel
- Appendix A Printer Maintenance
- Appendix B Specification
Documax 5380 User’s Manual
- 29 -
Note: When the top of form position (black mark position) is maximal, press LOAD/EJECT key, the
printer will not increase any more.
When the top of form position (black mark position) is minimal, press LF/FF key, the printer
will not decrease any more.
4.4 Tear-off Adjustment Mode
There is a tear-off bar at the edge of the window cover. When you have finished printing, you can
advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily tear off the
perforated sheets. The tear-off setting determines the distance between the perforation of tractor paper
and the tear-off bar.
Adjusting method:
After installed the tractor paper correctly and ensure the paper select lever is in tractor paper
position .Press LOAD/EJECT key to feed the paper to printing position, then press ONLINE key to
enter into offline mode, press LOAD/EJECT key to feed the paper to tear off position. With the printer
online, press both the LOAD/EJECT and LF/FF keys for about 3 seconds to get the printer to enter the
tear-off adjustment mode. When the printer enters this mode, the ONLINE LED and the COPY LED
blink alternately.
Use the LOAD/EJECT and LF/FF keys to alter the tear-off setting (The maximum removable size of
tear off position is based on the default zero position.):
LOAD/EJECT: Press the LOAD/EJECT key to adjust the distance in 1/60 inch increments. You can
maximum increase to +100/60 inch.
LF/FF: Press the LF/FF key to adjust the distance in 1/60 inch decrements. You can maximum
decrease to -40/60 inch.
To exit and save your new setting, press ONLINE key. The COPY LED and the ONLINE LED blink
simultaneously twice with two beeps, then the ONLINE LED will be on. Your new tear-off setting value
is saved.
Note: When the tear off position is maximal, press LOAD/EJECT key, the printer will not
increase any more.
When the tear off position is minimal, press LF/FF key, the printer will not decrease any
more.
4.5 Changing the Printing Settings
Documax 5380 printers divide printer settings into three sections: Quick menu setting, Menu setup
mode and Online-aptitude Parameter Settings.
4.5.1 Quick Menu Setting
Press ONLINE key for about 3 seconds when the ONLINE LED blinks, the printer beeps once and
enter into quick menu setting.
Facility key for copy mode:
Press LOAD/EJECT key once can switch between copy modes. The COPY LED off denotes the
NOTE
To exit without saving, just turn off the printer.
NOTE
To exit without saving, just turn the printer OFF.