User's Manual
Table Of Contents
- About Trademark
- Important Safety Instructions
- Chapter 1 Overview
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Removing the Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing and Removing the Paper rack
- 2.6 Installing the Ribbon Cartridge
- 2.7 Connecting the Printer to Your Computer
- 2.8 Connecting to the Power Cord
- 2.9 Installing Driver
- 2.10 Ethernet Settings
- Chapter 3 Loading Paper
- Chapter 4 Control Panel
- Appendix A Printer Maintenance
- Appendix B Specification
Documax 5380 User’s Manual
- 24 -
3.3 Using Tractor Paper
This printer feeds tractor paper from the rear of the printer to the front. (As Figure 3-6 shown)
3.3.1 Loading Tractor Paper
1. Connect the power cord to the printer and electrical outlet.
2. Set paper select lever at the position of tractor paper as shown in Figure 3-7.
Caution: When switching paper type to print, please pull the paper select lever to the end and
ensure the paper select lever at the position of tractor paper.
Suggestion: Move the paper guider to the leftmost of the paper rack, for fear not to affect the
tractor paper feeding.
3. Loosen the left and right tractor locks. (As shown in Figure 3-8)
4. Move the tractor left lock to the proper position in the left (“▽” denotes the transverse printing home
position). Press down the tractor left lock to lock the left tractor. Then move the right tractor to the
proper position. (As shown in Figure 3-9)
Figure 3-6 Feeding direction of tractor paper
Figure 3-8 Loosen the left tractor lock
Figure 3-7 Setting the paper select lever (tractor paper)
Paper select lever
Tractor paper