User's Manual
Table Of Contents
- About Trademark
- Important Safety Instructions
- Chapter 1 Overview
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Removing the Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing and Removing the Paper rack
- 2.6 Installing the Ribbon Cartridge
- 2.7 Connecting the Printer to Your Computer
- 2.8 Connecting to the Power Cord
- 2.9 Installing Driver
- 2.10 Ethernet Settings
- Chapter 3 Loading Paper
- Chapter 4 Control Panel
- Appendix A Printer Maintenance
- Appendix B Specification
Documax 5380 User’s Manual
- 23 -
Caution: Ensure the printing contents are within the printable area, or may cause the print
head breaks pins.
4. Please pull out the small extension tabs if the size of paper is long and requires extra support, as
shown in Figure 3-4.
5. Insert the paper as shown in Figure 3-5, the paper is fed into the printer automatically.
Figure 3-3 Adjusting the paper guider
Figure 3-5 Loading cut sheet
Small extension tab
NOTE
If the printer is set the LOADING at Menu Setup Mode as PUSH KEY, the printer will not
feed the paper automatically to printing position when paper is in. But pressing
LOAD/EJECT key can feed the paper to printing position. See details about changing
printer settings in Chapter 4.
Paper guider
Figure 3-4 Pull out the Small extension tab