User's Manual
Table Of Contents
- Declare
- Important Safety Instructions
- Chapter 1 Function Chracteristic
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Dismantling Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing the Ribbon Cartridge
- 2.6 Installing and Dismantling the Right and Left Holders
- 2.7 Installing and Dismantling the Front Table
- 2.8 Installing the Tractor
- 2.9 Connecting to the Printer
- 2.10 Connecting to the Power Source
- 2.11 Installing Driver
- 2.12 Network Settings
- Chapter 3 Control Panel
- Chapter 4 Printer Setting
- Chapter 5 Menu Function Description
- 5.1 Emulation
- 5.2 Print Mode
- 5.3 Font Select
- 5.4 Compress Printing
- 5.5 Characters Pitch
- 5.6 Chinese Pitch
- 5.7 Line Feed Pitch
- 5.8 Top of Form Adjustment
- 5.9 Page Length Tractor
- 5.10 Page Length Manual
- 5.11 Page Width Detect Right
- 5.12 Page Width Detect Left
- 5.13 Top Margin
- 5.14 Bottom Margin
- 5.15 Left Margin
- 5.16 Text Direction
- 5.17 Graph Direction
- 5.18 Zero Style
- 5.19 Character Table EPSON
- 5.20 Character Table IBM
- 5.21 International Font
- 5.22 Code Page
- 5.23 AGM Mode
- 5.24 Paper Skew Detection
- 5.25 Jam Detection
- 5.26 Manual Eject the Paper
- 5.27 Language
- 5.28 Quiet Mode
- 5.29 Carriage Return Setting
- 5.30 Line Feed Setting
- 5.31 Tear off Function
- 5.32 Load Paper
- 5.33 Cover Detection
- 5.34 Baud Rate
- 5.35 Parity Bit
- 5.36 Data Length
- 5.37 Stop Bit
- 5.38 Protocol
- Chapter 6 Troubleshooting
- Chapter 7 Printer Specification
- Appendix A Self-test and Adjustment
ACCEL-7450 User's Manual
- 54 -
Appendix A Self-test and Adjustment
A.1 Self-test Function
ACCEL-7450 printer supplies several print-test functions which make you run the self-test of the
printer in different states.
A.1.1 Chinese Self-test
After install the paper (tractor paper: 136 lines, manual paper feed: A4 paper), then use the following
way to run the self-test.
z Turn on the printer, firstly, press ALT+SPEED keys to initialize the printer, during the initialization,
press LF+ONLINE keys.
z Turn off the printer, press down LF+ONLINE keys and turn on the printer.
The printer will print out the signals and Chinese characters as following shows:
A.1.2 ASCII Test Mode
After install the paper (tractor paper: 136 lines, manual paper feed: A4 paper), then use the following
way to run the ASCII self-test.
z Turn on the printer, firstly, press ALT+SPEED keys to initialize the printer, during the initialization,
press LF key.
z Turn off the printer, press down LF key and turn on the printer.
The printer will contimuously print out ASCII characters.
A.1.3 Maintenance Printing Test (H pattern)
One page printing of H pattern is performed by turning power on, while pressing the TEAR OFF key.
After printing the printer will exit this test automatically. So you can send the printing command to the
printer to print.
Continuous printing of H pattern is performed by turning power on, while pressing the LOAD/EJECT
key and TEAR OFF key.
Pressing the ONLINE key can stop printing, and turn off the printer to exit H pattern mode.
中文自检模式
Version: ACCEL-7450 VX.X XXX XXXX-XX-XX
SN: 00000000000000000000 MAC Address: XX-XX-XX-XX-XX-XX
DHCP: YES IP: 10.0.0.1 Subnet mask: 255.255.255.0 gateway: 255.255.25
丂 丄 丅 丆 丏 丒 丗 丟 丠 両 丣 並 丩 丮 丯 丱 侤 侫 侭 侰 侱 侲 侳 侴 侶
僅 僆 僇 僈 僉 僊 僋 僌 凘 凙 凚 凜 凞 凟 凢 凣 凥 処 凧 凨 凩 凪 凬 凮 匑
咢 咥 咮 咰 咲 咵 咶 咷 咹 咺 咼 咾 哃 哅 哊 哋 嘆 嘇 嘊 嘋 嘍 嘐 嘑 嘒 嘓
圚 圛 圝 圞 圠 圡 圢 圤 堾 堿 塀 塁 塂 塃 塅 塆 塇 塈 塉 塊 塋 塎 塏 塐 夽
ASCII TEST MODE
Version: ACCEL-7450 VX.X XXX XXXX-XX-XX
SN: 00000000000000000000 MAC Address: XX-XX-XX-XX-XX-XX
DHCP: YES IP: 10.0.0.1 Subnet mask: 255.255.255.0 gateway: 255.255.25
!"#$%&’()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQR
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRS
"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRST
#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTU