User's Manual
Table Of Contents
- Declare
- Important Safety Instructions
- Chapter 1 Function Chracteristic
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Dismantling Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing the Ribbon Cartridge
- 2.6 Installing and Dismantling the Right and Left Holders
- 2.7 Installing and Dismantling the Front Table
- 2.8 Installing the Tractor
- 2.9 Connecting to the Printer
- 2.10 Connecting to the Power Source
- 2.11 Installing Driver
- 2.12 Network Settings
- Chapter 3 Control Panel
- Chapter 4 Printer Setting
- Chapter 5 Menu Function Description
- 5.1 Emulation
- 5.2 Print Mode
- 5.3 Font Select
- 5.4 Compress Printing
- 5.5 Characters Pitch
- 5.6 Chinese Pitch
- 5.7 Line Feed Pitch
- 5.8 Top of Form Adjustment
- 5.9 Page Length Tractor
- 5.10 Page Length Manual
- 5.11 Page Width Detect Right
- 5.12 Page Width Detect Left
- 5.13 Top Margin
- 5.14 Bottom Margin
- 5.15 Left Margin
- 5.16 Text Direction
- 5.17 Graph Direction
- 5.18 Zero Style
- 5.19 Character Table EPSON
- 5.20 Character Table IBM
- 5.21 International Font
- 5.22 Code Page
- 5.23 AGM Mode
- 5.24 Paper Skew Detection
- 5.25 Jam Detection
- 5.26 Manual Eject the Paper
- 5.27 Language
- 5.28 Quiet Mode
- 5.29 Carriage Return Setting
- 5.30 Line Feed Setting
- 5.31 Tear off Function
- 5.32 Load Paper
- 5.33 Cover Detection
- 5.34 Baud Rate
- 5.35 Parity Bit
- 5.36 Data Length
- 5.37 Stop Bit
- 5.38 Protocol
- Chapter 6 Troubleshooting
- Chapter 7 Printer Specification
- Appendix A Self-test and Adjustment
ACCEL-7450 User's Manual
- 46 -
Chapter 7 Printer Specification
7.1 General
Item Description
Type 24-Pin Dot Matrix Impact Printer
Print direction Bidirectional logic seeking
Number of columns 136 columns (10 CPI)/ 345.44 mm
ASCII Chinese
speed 10 CPI 15 CPI 6.7 CPI 7.5 CPI
High 2 400 CPS 600 CPS 266 CPS 300 CPS
High 1 300 CPS 450 CPS 200 CPS 225 CPS
Normal speed 200 CPS 300 CPS 133 CPS 150 CPS
Print speed
High density 150 CPS 225 CPS 100 CPS 113 CPS
Diameter of wire: 0.22 mm
Print head
Life: 500 million dots/wire
Resolution 360×360DPI (Max.)
ASCII: 17 international character sets (U.S.A., France, Germany, Britain, Denmark 1, Sweden,
Italy, Spain 1, Japan, Norway, Denmark 2, Spain 2, Latin Am, Korea, LEGAL, Netherland,
Turkey)
Character set
Chinese: GB 18030
ASCII: Eight kinds (Roman, Sans Serif, Courier, Prestige, Script, OCR-B, OCR-A, Orator)
Fonts set
Chinese: GB 18030 Song
Bar code
9 Bar codes: EAN-13, EAN-8, Interleaved 2 of 5, Matrix 2 of 5, Industrial 2 of 5, Code 39, Code
128 B, Code 128 C, NW-7
ASCII: 10 CPI, 12 CPI, 15 CPI, 17 CPI, 20 CPI, proportional
Character pitch
Chinese: 5CPI, 6CPI, 6.7CPI, 7.5CPI
Line space 1/3 inch, 1/4 inch, 1/6 inch, 1/8 inch, 1/9 inch and n/360 inch
Paper feed speed (Max.) 152.4 mm per second / 6 inches per second (continuous feed)
Emulation EPSON ESC/P-K2, OKI5530SC, IBM 2391
Interface
USB interface: USB 2.0 Full-Speed
Parallel interface: Centronics (IEEE1284 NIBBLE Mode)
Serial interface: RS-232C (DB 9-PIN or DB 25-PIN)
Ethernet interface:10/100 Base-T Ethernet Interface
* According to specific interface standards
Input Buffer 64KB
Model: JMR106
Ribbon
Life: 20 million characters (draft mode)
Noise ＜58 dB (A) (ISO7779 standard)
Control Panel 8 Keys + 4 indicator lights + Chinese LCD display.
Manual: Load/eject from front; Load from front and eject from rear
Paper feed type
Tractor paper: load front rear, eject from front
Thickness adjust Automatically detects the paper thickness and adjust the gap, or adjust through gap adjust lever.
Tractor paper
Width: 127 ～ 406 mm
Thickness: 0.08 ～ 0.12 mm
Weight: 60 ～ 105 g/m
2
Tractor fanfold paper
Width: 127 ～ 406 mm
Ply: ≤7
Thickness: 0.12 ～ 0.52 mm
Weight: 40 g/m
2
(1＋6)
Cut sheet
Width: 127 ～ 430 mm
Length: 127 ～ 430 mm
Thickness: 0.08 ～ 0.12 mm
Weight: 60 ～ 105 g/m
2
Paper specification
Cut sheet fanfold paper
Width: 127 ～ 430 mm