User's Manual
Table Of Contents
- Declare
- Important Safety Instructions
- Chapter 1 Function Chracteristic
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Dismantling Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing the Ribbon Cartridge
- 2.6 Installing and Dismantling the Right and Left Holders
- 2.7 Installing and Dismantling the Front Table
- 2.8 Installing the Tractor
- 2.9 Connecting to the Printer
- 2.10 Connecting to the Power Source
- 2.11 Installing Driver
- 2.12 Network Settings
- Chapter 3 Control Panel
- Chapter 4 Printer Setting
- Chapter 5 Menu Function Description
- 5.1 Emulation
- 5.2 Print Mode
- 5.3 Font Select
- 5.4 Compress Printing
- 5.5 Characters Pitch
- 5.6 Chinese Pitch
- 5.7 Line Feed Pitch
- 5.8 Top of Form Adjustment
- 5.9 Page Length Tractor
- 5.10 Page Length Manual
- 5.11 Page Width Detect Right
- 5.12 Page Width Detect Left
- 5.13 Top Margin
- 5.14 Bottom Margin
- 5.15 Left Margin
- 5.16 Text Direction
- 5.17 Graph Direction
- 5.18 Zero Style
- 5.19 Character Table EPSON
- 5.20 Character Table IBM
- 5.21 International Font
- 5.22 Code Page
- 5.23 AGM Mode
- 5.24 Paper Skew Detection
- 5.25 Jam Detection
- 5.26 Manual Eject the Paper
- 5.27 Language
- 5.28 Quiet Mode
- 5.29 Carriage Return Setting
- 5.30 Line Feed Setting
- 5.31 Tear off Function
- 5.32 Load Paper
- 5.33 Cover Detection
- 5.34 Baud Rate
- 5.35 Parity Bit
- 5.36 Data Length
- 5.37 Stop Bit
- 5.38 Protocol
- Chapter 6 Troubleshooting
- Chapter 7 Printer Specification
- Appendix A Self-test and Adjustment
ACCEL-7450 User's Manual
- 40 -
5.28 Quiet Mode
Set the quiet mode on or off.
Setting process:
MENU SETUP QUIET MODE
28. QUIET MODE ► 1. OFF ※
29. CR SETTING ► 2. ON
5.29 Carriage Return Setting
Set whether the printer line feed automatically when receives CR command.
Setting process:
MENU SETUP CR SETTING
29. CR SETTING ► 1. CR ONLY ※
30. LF SETTING ► 2. CR+LF
5.30 Line Feed Setting
Set whether the printer automatically carriage return when receives LF command.
Setting process:
MENU SETUP LF SETTING
30. LF SETTING ► 1. LF ONLY
31. TEAR OFF ► 2. LF+CR ※
5.31 Tear off Function
When the buffer area has no data, also the printer does not receive new data within the set time, the
printer will feed the paper to tear off position automatically.
After the printer receives new data, it will automatically feed paper to the printing home position of the
next page.
Setting process:
MENU SETUP TEAR OFF
31. TEAR OFF ► 1. OFF ※
32. LOA D PAPER ► 2. 0.3 SEC
3. 0.5 SEC
4. 1.0 SEC