User's Manual
Table Of Contents
- Declare
- Important Safety Instructions
- Chapter 1 Function Chracteristic
- Chapter 2 Preparation
- 2.1 Unpacking & Checking
- 2.2 Dismantling Protective Materials
- 2.3 Parts Identification
- 2.4 Installing the Printer
- 2.5 Installing the Ribbon Cartridge
- 2.6 Installing and Dismantling the Right and Left Holders
- 2.7 Installing and Dismantling the Front Table
- 2.8 Installing the Tractor
- 2.9 Connecting to the Printer
- 2.10 Connecting to the Power Source
- 2.11 Installing Driver
- 2.12 Network Settings
- Chapter 3 Control Panel
- Chapter 4 Printer Setting
- Chapter 5 Menu Function Description
- 5.1 Emulation
- 5.2 Print Mode
- 5.3 Font Select
- 5.4 Compress Printing
- 5.5 Characters Pitch
- 5.6 Chinese Pitch
- 5.7 Line Feed Pitch
- 5.8 Top of Form Adjustment
- 5.9 Page Length Tractor
- 5.10 Page Length Manual
- 5.11 Page Width Detect Right
- 5.12 Page Width Detect Left
- 5.13 Top Margin
- 5.14 Bottom Margin
- 5.15 Left Margin
- 5.16 Text Direction
- 5.17 Graph Direction
- 5.18 Zero Style
- 5.19 Character Table EPSON
- 5.20 Character Table IBM
- 5.21 International Font
- 5.22 Code Page
- 5.23 AGM Mode
- 5.24 Paper Skew Detection
- 5.25 Jam Detection
- 5.26 Manual Eject the Paper
- 5.27 Language
- 5.28 Quiet Mode
- 5.29 Carriage Return Setting
- 5.30 Line Feed Setting
- 5.31 Tear off Function
- 5.32 Load Paper
- 5.33 Cover Detection
- 5.34 Baud Rate
- 5.35 Parity Bit
- 5.36 Data Length
- 5.37 Stop Bit
- 5.38 Protocol
- Chapter 6 Troubleshooting
- Chapter 7 Printer Specification
- Appendix A Self-test and Adjustment
ACCEL-7450 User's Manual
- 24 -
10
LF
1. According to the LF pitch of the menu setting, press LF key once will
feed paper in forward direction according to the LF pitch. Hold on
pressing this key can continuously feed paper in forward direction
according to the LF pitch.
2. In the Menu Setup Mode, press LF key to the former page in the
menu.
11
MICRO LF
Press these keys can feed the paper in forward direction at a pitch of
1/90 inch.
Hold on pressing these keys can feed the paper continuously in forward
direction at the pitch of 1/90 inch.
12
RLF
1. According to the LF pitch of the menu setting, press RLF key once will
feed paper in reverse direction according to the LF pitch. Hold on
pressing this key can continuously feed paper in reverse direction
according to the LF pitch.
2. In the Menu Setup Mode, press RLF key to the next page in the
menu.
13
MICRO RLF
Press these keys can feed the paper in reverse direction at a pitch of
1/90 inch.
Hold on pressing these keys can feed the paper continuously in reverse
direction at the pitch of 1/90 inch.
3.1.3 LCD
In standby state, the LCD display shows the current paper feed way and the selected setting mode.
3.1.4 Paper Select Lever
1. Select the paper feed way by setting the paper select lever.
2. Before change the paper feed way, please eject the paper in the printer (press EJECT/LOAD key
to eject the paper).
LF
·Tractor fedding mode
(For tractor paper)
·Manual feeding mode
(For cut sheet)
MICRO LF
LF
ENTER
+
ALT
MICRO LF
RLF
MICRO RLF
RLF
ENTER
+
MICRO RLF
ALT