User's Manual

ACCEL-7450 User's Manual
- 10 -
2.11.2 Hand-operated install way
The installing steps for Windows 2000/XP/Vista are as follows
1. Click "Start" → "Settings", select "Printers".
2. Click "Add Printer", then it will show a window of "Add Printer Wizard", click "Next", then please read
the select direct carefully, Such as, select "Local printer” in the "Local or Network Printer" window,
then click "next".
3. Come out a window of "Select the Printer Port", select a usable port. Such as, select "LPT1: printer
port", click "Next".
4. Come out a window of "Manufacturers/Printers", click "Have Disk..." ".
5. Come out a window of "Install From Disk". Please according to the operating system environment,
such as Windows XP operating system you should select the path as follow: CD-ROM-"Driver"-"
WIN2000 (XP-Vista-Win7)", that you can find a file named: 7450.inf, click "Open", then click "OK",
click "Next".
6. Follow the direct click "Next" gradually till the installation is finished.
The installing steps for Windows 7 are as follows:
1. Click "Start" → "Devices and Printers".
2. Click "Add a printer", then it will show a window of "Add Printer", click "Add a local printer", and then
click "Next".
3. Come out a window of "Choose a printer port", select "Use an existing port", Such as, select "LPT1:
Printer Port", click "Next".
4. Come out a window of "Manufacturers/Printers", click "Have Disk...".
5. Come out a window of "Install From Disk". Please according to the operating system environment,
such as Windows 7 operating system you should select the path as follow:
CD-ROM-"Driver"-"WIN2000 (XP-Vista-Win7)", where you can find a file named: 7450.inf, click
"Open", then click "OK" to return to the window of "Manufacturers/Printers", click "Next".
The USB interface installing steps for Windows 2000/XP/Vista/Win7 are as follows:
The following steps are used Windows XP as example. There are slight differences among different
operating systems.
1. Connect an USB cable and turn on the printer.
2. After the computer find out new hardware and finish searching, come out a window of "Found New
Hardware Wizard", choose "Install from a list or specific location (Advanced), click "Next".
3. Come out a window of "Add New Hardware Wizard" -"Windows operation", choose "Don’t search, I
will choose the driver to install", click "Next".
4. Come out a window of "Hardware Type", select "Printer", click "Next". Come out a window of
"Manufacturers/Printers", click "Have Disk...".
5. Come out a window of "Install From Disk". Please according to the operating system environment,
you should select the path as follow: CD-ROM-"Driver”-"WIN2000 (XP-Vista-Win7)", where you can
find a file named: 7450.inf, click "Open", then click "OK" to return to the window of "Add printer
wizard", click "Next".
6. Follow the direct click "Next" gradually till the installation is finished.
The installing steps for Windows 98 are as follows:
(1) The installing steps with a parallel cable or a serial cable:
1. Click "Start" → "Settings" → "Printers".
2. Click "Add Printer", then it will show a window of "Add Printer Wizard", click "Next", then please
read the select direct carefully, Such as, select "Local printer" in the "Local or Network Printer"