User's Manual
Table Of Contents
- Chapter 1 Setting up the printer
- 1.1 Unpacking the printer
- 1.2 Connecting the printer to the power source
- 1.3 Connecting the printer to the computer
- 1.4 Installing the ribbon cassette
- 1.5 Setting up the Rear tractor mode
- 1.6 Setting up the Manual mode
- 1.7 Setting up the Front tractor mode
- 1.8 Setting up the CSF (option) mode
- 1.9 Installing the printer driver
- Chapter 2 Control panel operation
- Chapter 3 Setup options
- Chapter 4 How to use SETUP Memory
- Chapter 5 Troubleshooting
- Chapter 6 Specifications
Chapter 1 Setting up the printer
4
3. Fit the holes in the ribbon attachment to the right and
left projections on the print head.
• Make sure that the ribbon is properly under the edge of the print
head.
4. Turn the ribbon feed knob counterclockwise to remove
any slack in the ribbon.
1.5 Setting up the Rear tractor mode
• Tractor can be installed in front or rear side; Front tractor or Rear tractor, called in
the hand book.